2e:I[924663,["/_next/static/chunks/1czk5und2ee0h.js","/_next/static/chunks/0_0zan3krtvis.js","/_next/static/chunks/0xi7uy6azxow3.js","/_next/static/chunks/0ul8gf_lpsyxf.js","/_next/static/chunks/2-_16c3lir1i3.js","/_next/static/chunks/39tgl00ns82ek.js","/_next/static/chunks/43o3pkgmdctwt.js","/_next/static/chunks/3mi10gpyts7fm.js","/_next/static/chunks/17iowb6kcilml.js","/_next/static/chunks/28nljigg269n0.js","/_next/static/chunks/208wn_e-2jy_6.js","/_next/static/chunks/01frd0qw7a7ai.js","/_next/static/chunks/1osp60055-w6z.js","/_next/static/chunks/1ujlhctb22rtg.js","/_next/static/chunks/35ywq9ib3dc1k.js"],"HwsConfigProvider"] 2f:I[970715,["/_next/static/chunks/1czk5und2ee0h.js","/_next/static/chunks/0_0zan3krtvis.js","/_next/static/chunks/0xi7uy6azxow3.js","/_next/static/chunks/0ul8gf_lpsyxf.js","/_next/static/chunks/2-_16c3lir1i3.js","/_next/static/chunks/39tgl00ns82ek.js","/_next/static/chunks/43o3pkgmdctwt.js","/_next/static/chunks/3mi10gpyts7fm.js","/_next/static/chunks/17iowb6kcilml.js","/_next/static/chunks/28nljigg269n0.js","/_next/static/chunks/208wn_e-2jy_6.js","/_next/static/chunks/01frd0qw7a7ai.js","/_next/static/chunks/1osp60055-w6z.js","/_next/static/chunks/1ujlhctb22rtg.js","/_next/static/chunks/35ywq9ib3dc1k.js"],"CartQuoteQuantitiesProvider"] 30:I[483527,["/_next/static/chunks/1czk5und2ee0h.js","/_next/static/chunks/0_0zan3krtvis.js","/_next/static/chunks/0xi7uy6azxow3.js","/_next/static/chunks/0ul8gf_lpsyxf.js","/_next/static/chunks/2-_16c3lir1i3.js","/_next/static/chunks/39tgl00ns82ek.js","/_next/static/chunks/43o3pkgmdctwt.js","/_next/static/chunks/3mi10gpyts7fm.js","/_next/static/chunks/17iowb6kcilml.js","/_next/static/chunks/28nljigg269n0.js","/_next/static/chunks/208wn_e-2jy_6.js","/_next/static/chunks/01frd0qw7a7ai.js","/_next/static/chunks/1osp60055-w6z.js","/_next/static/chunks/1ujlhctb22rtg.js","/_next/static/chunks/35ywq9ib3dc1k.js"],"FinderPageConfigProvider"] 31:I[763051,["/_next/static/chunks/1czk5und2ee0h.js","/_next/static/chunks/0_0zan3krtvis.js","/_next/static/chunks/0xi7uy6azxow3.js","/_next/static/chunks/0ul8gf_lpsyxf.js","/_next/static/chunks/2-_16c3lir1i3.js","/_next/static/chunks/39tgl00ns82ek.js","/_next/static/chunks/43o3pkgmdctwt.js","/_next/static/chunks/3mi10gpyts7fm.js","/_next/static/chunks/17iowb6kcilml.js","/_next/static/chunks/28nljigg269n0.js","/_next/static/chunks/208wn_e-2jy_6.js","/_next/static/chunks/01frd0qw7a7ai.js","/_next/static/chunks/1osp60055-w6z.js","/_next/static/chunks/1ujlhctb22rtg.js","/_next/static/chunks/35ywq9ib3dc1k.js"],"FinderParamsProvider"] 32:I[231521,["/_next/static/chunks/1czk5und2ee0h.js","/_next/static/chunks/0_0zan3krtvis.js","/_next/static/chunks/0xi7uy6azxow3.js","/_next/static/chunks/0ul8gf_lpsyxf.js","/_next/static/chunks/2-_16c3lir1i3.js","/_next/static/chunks/39tgl00ns82ek.js","/_next/static/chunks/43o3pkgmdctwt.js","/_next/static/chunks/3mi10gpyts7fm.js","/_next/static/chunks/17iowb6kcilml.js","/_next/static/chunks/28nljigg269n0.js","/_next/static/chunks/208wn_e-2jy_6.js","/_next/static/chunks/01frd0qw7a7ai.js","/_next/static/chunks/1osp60055-w6z.js","/_next/static/chunks/1ujlhctb22rtg.js","/_next/static/chunks/35ywq9ib3dc1k.js"],"default"] 33:T46e,Suitable for CMMs above MPE E0: 0.5 μm + L/500 (L = Length in mm) and measuring volume of at least 500 x 500 x 500 mm Typical machines include DuraMax, SPECTRUM, CONTURA, ACCURA, MICURA, PRISMO Not suitable for XENOS Package includes: - CMM Monitoring Tool evaluation software. - 1 Eumetron dongle license per artifact. Supports multiple CMMs - Step Gauge, Length 300 mm - Setting Ring, Diameter 50 mm - Sphere, Diameter 25 mm - Styli for XT and XXT sensors - Alignment unit (angle template and angle indicator) - Elevation column for measurement in Z-axis direction and the multiple probe test - Robust transport case with lock and foam insert - Accredited calibration of all standards in accordance with DIN EN ISO/IEC 17025 Benefits of CMM Monitoring Tool evaluation software include: - Automatically generated measurement plans according to ISO10360 - Setup instructions and guidelines for inspection intervals with warnings - Archived records and structured ISO10360 protocols - Administration of multiple artifacts and CMMs Remote online training (626106-9355-641) is also available for an additional cost.34:T4cc,Accommodates the use of step gauges from the manufacturers ZEISS, ITS and KOBA in lengths of 300 to 700 mm. Suitable for CMMs with measuring volume of at least 500 x 500 x 500 mm Typical machines include SPECTRUM, CONTURA, ACCURA, MICURA, PRISMO Not suitable for DuraMax, XENOS Package includes: - CMM Monitoring Tool evaluation software. - 1 Eumetron dongle license per artifact. Supports multiple CMMs - Setting Ring, Diameter 50 mm - Sphere, Diameter 25 mm - 2 additional spheres for rotary table (RT), Diameter 25 mm - Styli for XT and XXT sensors - Alignment unit (angle template and angle indicator) - Elevation column for measurement in Z-axis direction and the multiple probe test - Robust transport case with lock and foam insert - Accredited calibration of all standards in accordance with DIN EN ISO/IEC 17025 Benefits of CMM Monitoring Tool evaluation software include: - Automatically generated measurement plans according to ISO10360 - Setup instructions and guidelines for inspection intervals with warnings - Archived records and structured ISO10360 protocols - Administration of multiple artifacts and CMMs Remote online training (626106-9355-641) is also available for an additional cost.35:T48e,Accommodates the use of step gauges from the manufacturers ZEISS, ITS and KOBA in lengths of 300 to 700 mm. Suitable for CMMs with measuring volume of at least 500 x 500 x 500 mm Typical machines include SPECTRUM, CONTURA, ACCURA, MICURA, PRISMO Not suitable for DuraMax, XENOS Package includes: - CMM Monitoring Tool evaluation software. - 1 Eumetron dongle license per artifact. Supports multiple CMMs - Setting Ring, Diameter 50 mm - Sphere, Diameter 25 mm - Styli for XT and XXT sensors - Alignment unit (angle template and angle indicator) - Elevation column for measurement in Z-axis direction and the multiple probe test - Robust transport case with lock and foam insert - Accredited calibration of all standards in accordance with DIN EN ISO/IEC 17025 Benefits of CMM Monitoring Tool evaluation software include: - Automatically generated measurement plans according to ISO10360 - Setup instructions and guidelines for inspection intervals with warnings - Archived records and structured ISO10360 protocols - Administration of multiple artifacts and CMMs Remote online training (626106-9355-641) is also available for an additional cost.36:T580,The multi-feature check is a method for the exemplary determination of the measurement uncertainty related to the test feature and of the suitability of the test process for nearly all dimensional, shape and position deviations occurring in coordinate measurement technology. It is based on a specially developed universal test specimen, which is calibrated DAkkS and is used in conjunction with the experimental method according to VDI/VDE 2617 sheet 8 "Test process suitability of measurements with coordinate measuring instruments" or VDA5 or DIN EN ISO 15530-3. Depending on the partial spectrum of the user, for example, the following test features of the universal test specimen can be selected. For this purpose, the measurement uncertainties can be determined in relation to the respective coordinate measuring device and a statement about the test process suitability can be derived: - diameter, length, angle - Straightness, flatness, roundness, cylinder shape - parallelism, rectangularity, inclination, position, concentricity, coaxiality, symmetry - concentricity, cross-country, total concentricity, total concentricity When applying the method according to VDI/VDE 2617 sheet 9, the measurement uncertainties and the test process suitability are determined realistically taking into account the current temperatures on site with workpiece-like material and workpiece-like surface influences.37:T4ac,Suitable for CMMs above MPE E0: 0.5 μm + L/500 (L = Length in mm) and measuring volume of at least 500 x 500 x 500 mm Typical machines include DuraMax, SPECTRUM, CONTURA, ACCURA, MICURA, PRISMO Not suitable for XENOS Package includes: - CMM Monitoring Tool evaluation software. - 1 Eumetron dongle license per artifact. Supports multiple CMMs - 2 additional spheres for rotary table (RT), Diameter 25 mm - Step Gauge, Length 300 mm - Setting Ring, Diameter 50 mm - Sphere, Diameter 25 mm - Styli for XT and XXT sensors - Alignment unit (angle template and angle indicator) - Elevation column for measurement in Z-axis direction and the multiple probe test - Robust transport case with lock and foam insert - Accredited calibration of all standards in accordance with DIN EN ISO/IEC 17025 Benefits of CMM Monitoring Tool evaluation software include: - Automatically generated measurement plans according to ISO10360 - Setup instructions and guidelines for inspection intervals with warnings - Archived records and structured ISO10360 protocols - Administration of multiple artifacts and CMMs Remote online training (626106-9355-641) is also available for an additional cost.a:["$","div",null,{"data-testid":"product-list-page","children":["$","$L2e",null,{"hwsBffHost":"https://experience.metrology.zeiss.com/api/hws","baseUrl":"https://store.metrology.zeiss.com","appEnv":"prd","children":["$","$L2f",null,{"children":["$","$L30",null,{"productType":"$undefined","categorySlug":"3223100-calibration-artifacts","children":["$","$L31",null,{"productType":"$undefined","categorySlug":"3223100-calibration-artifacts","children":["$","$L32",null,{"finderPageData":{"type":"IQS-Page-Entry","referenceTitle":"ProductListPage","title":"{h1} Products | ZEISS Hardware Store","description":"Browse {h1} products and accessories for ZEISS metrology systems in the ZEISS Hardware Store","ogSiteName":"Zeiss Metrology (America)","sections":[{"referenceTitle":"Filters","headline":"Filters","type":"IQS-Section","contents":[]},{"referenceTitle":"ProductList","attributes":[{"referenceTitle":"MaterialNumber","shortName":"Material number","longName":"Material number","productKey":"sku","shortCode":"SKU","attributeType":"TECH"},{"referenceTitle":"Availability","shortName":"Availability","longName":"Availability","productKey":"availabilityStatus","shortCode":"AVAIL","attributeType":"TECH"},{"referenceTitle":"ExtensionType","shortName":"Extension type","longName":"Extension type","productKey":"extensionType","shortCode":"ExtType","attributeType":"TECH"},{"referenceTitle":"DSphere","shortName":"Ø Sphere (DK)","longName":"Diameter sphere (DK)","productKey":"dk","shortCode":"DK","attributeType":"TECH"},{"referenceTitle":"MeasurementLength","shortName":"Measurement length (ML)","longName":"Measurement length (ML)","productKey":"ml","shortCode":"ML","attributeType":"TECH"},{"referenceTitle":"TipMaterial","shortName":"Tip material","longName":"Tip material","productKey":"stylusTipMaterial","shortCode":"StylusTipMaterial","attributeType":"TECH"},{"referenceTitle":"ShaftMaterial","shortName":"Shaft material","longName":"Shaft material","productKey":"shaftMaterial","shortCode":"ShaftMaterial","attributeType":"TECH"},{"referenceTitle":"Price","shortName":"Price","longName":"Price","productKey":"price","shortCode":"Price","attributeType":"TECH"},{"referenceTitle":"MeasuringLengthE","shortName":"2. Measuring length (MLE)","longName":"2nd Measurement length (MLE)","productKey":"mle","shortCode":"MLE","attributeType":"TECH"},{"referenceTitle":"Angle","shortName":"Angle 1(W1)","longName":"Angle 1(W1)","productKey":"angle","shortCode":"W1","attributeType":"TECH"},{"referenceTitle":"Diameter","shortName":"Diameter","longName":"Diameter","productKey":"diameter","shortCode":"diameter","attributeType":"TECH"},{"referenceTitle":"Angle2","shortName":"Angle 2(W2)","longName":"Angle 2(W2)","productKey":"angle2","shortCode":"W2","attributeType":"TECH"},{"referenceTitle":"Width","shortName":"Width (B)","longName":"Width (B)","productKey":"width","shortCode":"B","attributeType":"TECH"},{"referenceTitle":"DBody","shortName":"Ø Body (DG)","longName":"Ø Body (DG)","productKey":"dg","shortCode":"DG","attributeType":"TECH"},{"referenceTitle":"TipGeometry","shortName":"Tip geometry","longName":"Tip geometry","productKey":"stylusTip","shortCode":"StylusTip","attributeType":"TECH"},{"referenceTitle":"DShaft","shortName":"Ø Shaft (DS)","longName":"Ø Shaft (DS)","productKey":"ds","shortCode":"DS","attributeType":"TECH"},{"referenceTitle":"Weight","shortName":"Weight","longName":"Weight","productKey":"weight","shortCode":"Weight","attributeType":"TECH"},{"referenceTitle":"MeasuringLengthF","shortName":"3. Measuring Length (MLF)","longName":"3rd measurement length (MLF)","productKey":"mlf","shortCode":"MLF","attributeType":"TECH"},{"referenceTitle":"DShaftE","shortName":"Ø 2. Shaft (DSE)","longName":"2nd shaft diameter (DSE)","productKey":"dse","shortCode":"DSE","attributeType":"TECH"},{"referenceTitle":"DShaftF","shortName":"Ø 3. Shaft (DSF)","longName":"3rd shaft diameter (DSF)","productKey":"dsf","shortCode":"DSF","attributeType":"TECH"},{"referenceTitle":"Length","shortName":"Length (L)","longName":"Length (L)","productKey":"length","shortCode":"L","attributeType":"TECH"},{"referenceTitle":"StylusType","shortName":"Stylus type","longName":"Stylus type","productKey":"stylusType","shortCode":"StylusType","attributeType":"TECH"},{"referenceTitle":"ConnectionType","shortName":"Connection Type","longName":"Connection Type","productKey":"connectionType","shortCode":"ConnectionType","attributeType":"TECH"},{"referenceTitle":"ConnectionTypeOut","shortName":"Connection Type Out","longName":"Connection Type Out","productKey":"connectionTypeOut","shortCode":"CONNOUT","attributeType":"TECH"},{"referenceTitle":"Material","shortName":"Material","longName":"Material","productKey":"material","shortCode":"Material","attributeType":"TECH"},{"referenceTitle":"MeasuringSensor","shortName":"Measuring sensor","longName":"Measuring sensor","productKey":"measuringSystemType","shortCode":"SENSOR","attributeType":"TECH"},{"referenceTitle":"AccuracyLevel","shortName":"Accuracy level","longName":"Accuracy level","productKey":"accuracyLevel","shortCode":"ACC","attributeType":"TECH"},{"referenceTitle":"MeasurementLengthG","shortName":"Measurement length (MLG)","longName":"Measurement length (MLG)","productKey":"mlg","shortCode":"MLG","attributeType":"TECH"},{"referenceTitle":"MeasurementLengthH","shortName":"Measurement length (MLH)","longName":"Measurement length (MLH)","productKey":"mlh","shortCode":"MLH","attributeType":"TECH"},{"referenceTitle":"NumberPositions","shortName":"Number positions","longName":"Number positions","productKey":"numberPositions","shortCode":"POS","attributeType":"TECH"},{"referenceTitle":"Application","shortName":"Application","longName":"Application","productKey":"application","shortCode":"Application","attributeType":"TECH"},{"referenceTitle":"ProductType","shortName":"Product type","longName":"Product type","productKey":"pimProductType","shortCode":"ProductType","attributeType":"TECH"},{"referenceTitle":"ProductInformation","shortName":"Product information","longName":"Product information","productKey":"productInformation","shortCode":"ProductInformation","attributeType":"MARKET"},{"referenceTitle":"Material","shortName":"Material","longName":"Material","productKey":"material","shortCode":"Material","attributeType":"TECH"},{"referenceTitle":"Diameter","shortName":"Diameter","longName":"Diameter","productKey":"diameter","shortCode":"diameter","attributeType":"TECH"},{"referenceTitle":"Machine","shortName":"Machine","longName":"Machine","productKey":"measuringSystem","shortCode":"Machine","attributeType":"TECH"},{"referenceTitle":"Coding","shortName":"Coding","longName":"Coding","productKey":"coding","shortCode":"Coding","attributeType":"TECH"},{"referenceTitle":"Format","shortName":"Format","longName":"Format","productKey":"format","shortCode":"Format","attributeType":"TECH"},{"referenceTitle":"Distance","shortName":"Distance","longName":"Distance","productKey":"distance","shortCode":"Distance","attributeType":"TECH"},{"referenceTitle":"Quantity","shortName":"Quantity","longName":"Quantity","productKey":"quantityPieces","shortCode":"Quantity","attributeType":"TECH"},{"referenceTitle":"OuterDiameter","shortName":"Outer diameter","longName":"Outer diameter","productKey":"outerDiameter","shortCode":"OuterDiameter","attributeType":"TECH"},{"referenceTitle":"PointDiameter","shortName":"Point diameter","longName":"Point diameter","productKey":"pointDiameter","shortCode":"PointDiameter","attributeType":"TECH"},{"referenceTitle":"ShaftDiameter","shortName":"Shaft diameter","longName":"Shaft diameter","productKey":"shaftDiameter","shortCode":"ShaftDiameter","attributeType":"TECH"},{"referenceTitle":"ShaftLength","shortName":"Shaft length","longName":"Shaft length","productKey":"shaftLength","shortCode":"ShaftLength","attributeType":"TECH"},{"referenceTitle":"EdgeLength","shortName":"Edge length","longName":"Edge length","productKey":"edgeLength","shortCode":"EdgeLength","attributeType":"TECH"},{"referenceTitle":"PlateThickness","shortName":"Plate thickness","longName":"Plate thickness","productKey":"plateThickness","shortCode":"PlateThickness","attributeType":"TECH"},{"referenceTitle":"PointThickness","shortName":"Point thickness","longName":"Point thickness","productKey":"pointThickness","shortCode":"PointThickness","attributeType":"TECH"},{"referenceTitle":"AdhesiveStrength","shortName":"Adhesive Strength","longName":"Adhesive Strength","productKey":"adhesiveStrength","shortCode":"AdhesiveStrength","attributeType":"TECH"},{"referenceTitle":"Magnetic","shortName":"Magnetic","longName":"Magnetic","productKey":"magnetic","shortCode":"Magnetic","attributeType":"TECH"},{"referenceTitle":"OpticalCharacteristics","shortName":"Optical Characteristics ","longName":"Optical Characteristics ","productKey":"opticalCharacteristics","shortCode":"OpticalCharacteristics","attributeType":"TECH"},{"referenceTitle":"TemperatureResistant","shortName":"Temperature resistant","longName":"Temperature resistant","productKey":"temperatureResistant","shortCode":"TemperatureResistant","attributeType":"TECH"},{"referenceTitle":"MeasuringForce","shortName":"Measuring force","longName":"Measuring force","productKey":"measuringForce","shortCode":"measuringForce","attributeType":"TECH"},{"referenceTitle":"ClampingRange","shortName":"Clamping range","longName":"Clamping range","productKey":"clampingRange","shortCode":"ClampingRange","attributeType":"TECH"},{"referenceTitle":"Height","shortName":"Height (H)","longName":"Height (H)","productKey":"height","shortCode":"H","attributeType":"TECH"},{"referenceTitle":"Radius","shortName":"Radius (R)","longName":"Radius (R)","productKey":"radiusR","shortCode":"R","attributeType":"TECH"},{"referenceTitle":"LH","shortName":"LH","longName":"LH","productKey":"lh","shortCode":"LH","attributeType":"TECH"},{"referenceTitle":"LV","shortName":"LV","longName":"LV","productKey":"lv","shortCode":"LV","attributeType":"TECH"},{"referenceTitle":"Length1","shortName":"Length 1 (L1)","longName":"Length 1 (L1)","productKey":"l1","shortCode":"L1","attributeType":"TECH"},{"referenceTitle":"Diameter1","shortName":"Diameter (D1)","longName":"Diameter (D1)","productKey":"diameterD1","shortCode":"D1","attributeType":"TECH"},{"referenceTitle":"Diameter2","shortName":"Diameter (D2)","longName":"Diameter (D2)","productKey":"diameterD2","shortCode":"D2","attributeType":"TECH"},{"referenceTitle":"Diameter3","shortName":"Diameter (D3)","longName":"Diameter (D3)","productKey":"diameterD3","shortCode":"D3","attributeType":"TECH"},{"referenceTitle":"Dsg","shortName":"Ø 4. Shaft (DSG)","longName":"Ø 4. Shaft (DSG)","productKey":"dsg","shortCode":"DSG","attributeType":"TECH"},{"referenceTitle":"DimensionA","shortName":"Dimension A","longName":"Dimension A","productKey":"dimA","shortCode":"DimA","attributeType":"TECH"},{"referenceTitle":"DimensionB","shortName":"Dimension B","longName":"Dimension B","productKey":"dimB","shortCode":"DimB","attributeType":"TECH"},{"referenceTitle":"DimensionC","shortName":"Dimension C","longName":"Dimension C","productKey":"dimC","shortCode":"DimC","attributeType":"TECH"},{"referenceTitle":"DimensionD","shortName":"Dimension D","longName":"Dimension D","productKey":"dimD","shortCode":"DimD","attributeType":"TECH"},{"referenceTitle":"DimensionE","shortName":"Dimension E","longName":"Dimension E","productKey":"dimE","shortCode":"DimE","attributeType":"TECH"},{"referenceTitle":"DimensionF","shortName":"Dimension F","longName":"Dimension F","productKey":"dimF","shortCode":"DimF","attributeType":"TECH"},{"referenceTitle":"DimensionG","shortName":"Dimension G","longName":"Dimension G","productKey":"dimG","shortCode":"DimG","attributeType":"TECH"},{"referenceTitle":"DimensionH","shortName":"Dimension H","longName":"Dimension H","productKey":"dimH","shortCode":"DimH","attributeType":"TECH"}],"products":[{"productType":"HARDWARE_DEFAULT","id":"55df30a3-c713-4720-bd86-eae6736c60d2","sku":"626106-9215-000","name":"METROTOM Check Set G3","productName":"METROTOM Check Set G3","price":{"value":11499,"currencyCode":"EUR"},"images":[{"url":"https://dam.zeiss.com/fcf34522-6ea7-4e3a-9d1e-b38100a7c255/Original%20file.jpg","label":"pdp-1001"}],"previewImage":{"url":"https://dam.zeiss.com/fcf34522-6ea7-4e3a-9d1e-b38100a7c255/Original%20file.jpg","label":"preview"},"assets":[{"contentType":"application/pdf","url":"https://dam.zeiss.com/3c756e2c-96d0-43b9-a01d-b38300de5ec9/Original%20file.pdf","name":"BA_METROTOM_Check_1500_REV_4.0_de_392665_0"},{"contentType":"application/pdf","url":"https://dam.zeiss.com/98a7d480-dc82-4d62-a848-b38300b7fff7/Original%20file.pdf","name":"BA_METROTOM_Check_1500_REV_4.1_en_397611_0"}],"productHighlights":["Extra-rigid holder for devices with lifting table","VDI/VDE 2630 compliant test pieces","Easy evaluation, thanks to the test plan supplied","including DAkkS-calibration"],"productAdvantages":["Especially stiff holder for devices with lifting table"," VDI 2630 compliant test specimens enable audible monitoring","including DAkkS-calibration","robust plastic hard case","Approved by ZEISS Service, for consistent accuracy checking along the system life cycle"],"productInformation":"METROTOM Check test specimen, for METROTOM 1500 225 kV G3\n - incl. 27 balls, diameter 5 mm, with ThermoFit shank\n\nTest body for the interim testing of a CT system,\nfor determining the deviation SD according to VDI/VDE 2630,\nconsisting of a flexurally rigid device with\nPrecision balls mounted on a base plate of Invar\n\nIncluded in delivery\n - Acrylic glass cover\n - CALYPSO test plan on a data carrier\n - Operating instructions\n - DAkkS-calibration including certificate\n - Transport case","productHint":"ZEISS Calypso is required for evaluation.\nMS Excel is required for evaluation.","webshopShortDescription":"METROTOM Check Set G3","webshopLongDescription":null,"pimProductType":null,"application":null,"productApplication":"The CT Check RT is used for intermediate testing METROTOM 1500 machines according to VDI/VDE 2630\n\nThe accuracy monitoring of your measuring device gives you confidence in your measurement values and security for the next quality audit. Every measuring instrument should be regularly monitored according to the ISO 9000 standard series.\nUsing a CALYPSO measurement plan and MS-Excel , an evaluating between calibration values and measured values are compared.\nThe process is straightforward and fast, so that you can check your Metrotom within a short time without additional training.\n27 spheres are positioned in the measuring volume allowing to evaluate 25 measuring lengths distributed for VDI 2630 compliance.","productSlug":"626106-9215-000-metrotom-check-set-for-m1500-rt-rb","relatedProducts":[{"key":"626106-9214-000","sorting":10},{"key":"626106-9310-000","sorting":20},{"key":"626106-9340-030","sorting":30}],"availabilityStatus":"MADE_TO_ORDER","profitCenter":"P0069","bundleProducts":[],"mle":null,"dse":null,"mlf":null,"dsf":null,"accuracyLevel":null,"adhesiveStrength":null,"angle":null,"angle2":null,"clampingRange":null,"coding":null,"connectionType":null,"connectionTypeOut":null,"diameter":null,"diameterD1":null,"diameterD2":null,"diameterD3":null,"dimA":null,"dimB":null,"dimC":null,"dimD":null,"dimE":null,"dimF":null,"dimG":null,"dimH":null,"distance":null,"edgeLength":null,"extensionType":null,"format":null,"grid":null,"height":null,"length":null,"l1":null,"lh":null,"lv":null,"measuringSystem":["METROTOM 1500 G3","METROTOM 1"],"magnetic":null,"material":null,"ml":null,"mlg":null,"mlh":null,"measuringVolumeX":null,"measuringForce":null,"measuringSystemType":null,"numberPositions":null,"opticalCharacteristics":null,"outerDiameter":null,"plateThickness":null,"pointDiameter":null,"pointThickness":null,"quantityPieces":null,"radiusR":null,"shaftDiameter":null,"shaftLength":null,"shaftMaterial":null,"stylusTip":null,"stylusTipMaterial":null,"stylusType":null,"temperatureResistant":null,"threadG1":null,"threadG2":null,"weight":null,"width":null,"dsg":null,"dg":null,"ds":null,"dk":null},{"productType":"HARDWARE_DEFAULT","id":"08412044-cc21-4501-9265-95548aa5fda5","sku":"626106-9310-000","name":"METROTOM Check Set micro","productName":"METROTOM Check Set micro","price":{"value":11499,"currencyCode":"EUR"},"images":[{"url":"https://dam.zeiss.com/8a0b59fd-ce8b-4f2c-8ab9-b38100b7467f/Original%20file.png","label":"pdp-1001"}],"previewImage":{"url":"https://dam.zeiss.com/8a0b59fd-ce8b-4f2c-8ab9-b38100b7467f/Original%20file.png","label":"preview"},"assets":[{"contentType":"application/pdf","url":"https://dam.zeiss.com/4544b91b-10a7-4d95-a849-b38300b8054e/Original%20file.pdf","name":"BA_METROTOM_Check_Micro_800_REV_3.1_en_397662_0"},{"contentType":"application/pdf","url":"https://dam.zeiss.com/e691f843-b4ad-473d-8173-b38300de5979/Original%20file.pdf","name":"BA_METROTOM_Check_Micro_800_REV_3.0_de_392736_0"}],"productHighlights":["Pallet with fitted test body for devices with lifting table, allows easy positioning","VDI/VDE 2630 compliant test pieces","Easy evaluation, thanks to the test plan supplied","including DAkkS calibration"],"productAdvantages":["Especially stiff holder for devices with lifting table","VDI 2630 compliant test specimens enable audible monitoring","including DAkkS calibration","robust plastic hard case","Approved by ZEISS Service, for consistent accuracy checking along the system life cycle"],"productInformation":"Test specimen METROTOM check micro, for METROTOM 800\n - incl. 22 Spheres, diameter 5 mm, with ThermoFit shank\n\nTest body for the interim testing of a CT system,\nfor determining the deviation SD according to VDI/VDE 2630,\nconsisting of a flexurally rigid device with\nPrecision balls mounted on a base plate of Invar\nIncluded in delivery\n - Acrylic glass cover\n - CALYPSO test plan on a data carrier\n - Operating instructions\n - DAkkS calibration including certificate\n - Transport case","productHint":null,"webshopShortDescription":"METROTOM Check Set micro","webshopLongDescription":null,"pimProductType":null,"application":null,"productApplication":"The CT Check Micro is used for intermediate testing METROTOM 800 and METROTOM 6 Scout machines according to VDI/VDE 2630\n\nThe accuracy monitoring of your measuring device gives you confidence in your measurement values and security for the next quality audit. Every measuring instrument should be regularly monitored according to the ISO 9000 standard series.\nUsing a CALYPSO measurement plan and MS-Excel , an evaluating between calibration values and measured values are compared.\nThe process is straightforward and fast, so that you can check your Metrotom within a short time without additional training.\n22 spheres are positioned in the measuring volume allowing to evaluate 25 measuring lengths distributed for VDI 2630 compliance.","productSlug":"626106-9310-000-metrotom-check-micro-set","relatedProducts":[{"key":"626106-9214-000","sorting":10},{"key":"626106-9215-000","sorting":20},{"key":"626106-9340-030","sorting":30}],"availabilityStatus":"MADE_TO_ORDER","profitCenter":"P0069","bundleProducts":[],"mle":null,"dse":null,"mlf":null,"dsf":null,"accuracyLevel":null,"adhesiveStrength":null,"angle":null,"angle2":null,"clampingRange":null,"coding":null,"connectionType":null,"connectionTypeOut":null,"diameter":null,"diameterD1":null,"diameterD2":null,"diameterD3":null,"dimA":null,"dimB":null,"dimC":null,"dimD":null,"dimE":null,"dimF":null,"dimG":null,"dimH":null,"distance":null,"edgeLength":null,"extensionType":null,"format":null,"grid":null,"height":null,"length":null,"l1":null,"lh":null,"lv":null,"measuringSystem":["METROTOM 800","METROTOM 6 scout"],"magnetic":null,"material":null,"ml":null,"mlg":null,"mlh":null,"measuringVolumeX":null,"measuringForce":null,"measuringSystemType":null,"numberPositions":null,"opticalCharacteristics":null,"outerDiameter":null,"plateThickness":null,"pointDiameter":null,"pointThickness":null,"quantityPieces":null,"radiusR":null,"shaftDiameter":null,"shaftLength":null,"shaftMaterial":null,"stylusTip":null,"stylusTipMaterial":null,"stylusType":null,"temperatureResistant":null,"threadG1":null,"threadG2":null,"weight":null,"width":null,"dsg":null,"dg":null,"ds":null,"dk":null},{"productType":"HARDWARE_DEFAULT","id":"d9106de0-339f-4407-9178-82cb08e73a02","sku":"626119-0001-026","name":"Gear-Check, involute Artifact","productName":"Artifact Gear Check, GEAR® PRO involute","price":{"value":4851,"currencyCode":"EUR"},"images":[{"url":"https://dam.zeiss.com/6ab203c0-1070-4291-8d2e-b38001434ec3/Original%20file.jpg","label":"pdp-1001"}],"previewImage":{"url":"https://dam.zeiss.com/6ab203c0-1070-4291-8d2e-b38001434ec3/Original%20file.jpg","label":"preview"},"assets":[],"productHighlights":[],"productAdvantages":[],"productInformation":"Package includes:\n\n - Involute Gear Artifact, tolerance class 3 according to DIN 3962\n - Measurement plans for CALYPSO and GEAR® PRO involute \n - Accredited calibration certificate","productHint":"GEAR® PRO involve software not included.","webshopShortDescription":"Gear-Check, involute Artifact","webshopLongDescription":null,"pimProductType":"Artifacts","application":"Check","productApplication":"Gear-Check, involute Artifact is used to verify and monitor the accuracy of involute gear inspections. Checking accuracy can be added to a quality routine or performed after collisions, environmental changes or system changes. The check provides immediate notice of accuracy errors.\n\nGear-Check requires GEAR® PRO involute software.","productSlug":"626119-0001-026-gear-check-gauge-including-certificate","relatedProducts":[],"availabilityStatus":"MADE_TO_ORDER","profitCenter":"P0069","bundleProducts":[],"mle":null,"dse":null,"mlf":null,"dsf":null,"accuracyLevel":null,"adhesiveStrength":null,"angle":null,"angle2":null,"clampingRange":null,"coding":null,"connectionType":null,"connectionTypeOut":null,"diameter":null,"diameterD1":null,"diameterD2":null,"diameterD3":null,"dimA":null,"dimB":null,"dimC":null,"dimD":null,"dimE":null,"dimF":null,"dimG":null,"dimH":null,"distance":null,"edgeLength":null,"extensionType":null,"format":null,"grid":null,"height":null,"length":null,"l1":null,"lh":null,"lv":null,"measuringSystem":[],"magnetic":null,"material":null,"ml":null,"mlg":null,"mlh":null,"measuringVolumeX":null,"measuringForce":null,"measuringSystemType":null,"numberPositions":null,"opticalCharacteristics":null,"outerDiameter":null,"plateThickness":null,"pointDiameter":null,"pointThickness":null,"quantityPieces":null,"radiusR":null,"shaftDiameter":null,"shaftLength":null,"shaftMaterial":null,"stylusTip":null,"stylusTipMaterial":null,"stylusType":null,"temperatureResistant":null,"threadG1":null,"threadG2":null,"weight":null,"width":null,"dsg":null,"dg":null,"ds":null,"dk":null},{"productType":"HARDWARE_DEFAULT","id":"821581b2-6bd3-44e0-9e01-4ae08dfd27d0","sku":"626106-0058-000","name":"Rotary Table-Check RB-10 Artifact (Software not included)","productName":"RT Check for O-INSPECT and DuraMax Rotary Table, calibrated (Software not included)","price":{"value":1282,"currencyCode":"EUR"},"images":[{"url":"https://dam.zeiss.com/0e386b24-801e-4658-bbf4-b3800143bd6e/Original%20file.jpg","label":"pdp-1001"}],"previewImage":{"url":"https://dam.zeiss.com/0e386b24-801e-4658-bbf4-b3800143bd6e/Original%20file.jpg","label":"preview"},"assets":[],"productHighlights":[],"productAdvantages":[],"productInformation":"Supports ZEISS RB-10 rotary tables\n\nPackage includes:\n\n - 1 ThermoFit probe SiN, ball diameter 10 mm, length 25 mm\n - 1 ThermoFit probe SiN, ball diameter 10 mm, length 50 mm\n - Robust transport case with lock and foam insert\n - Accredited calibration certificate","productHint":"Software for the Rotary Table-Check is sold separately. Product ID 626001-0530-020","webshopShortDescription":"Rotary Table-Check RB-10 Artifact (Software not included)","webshopLongDescription":null,"pimProductType":"Artifacts","application":"Check","productApplication":"Rotary Table-Check RB-10 Artifact is used to verify and monitor the accuracy of RB rotary tables between annual calibrations. Checking the RT accuracy can be added to a quality routine or performed after collisions, environmental changes or system changes. The check provides immediate notice of accuracy errors.\n\nRotary Table RB is typically found with Duramax and O-Inspect\n\nSoftware for this Check is sold separately. Product ID 626001-0530-020","productSlug":"626106-0058-000-alpha-check-axis-for-rt-o-inspect-calib","relatedProducts":[],"availabilityStatus":"MADE_TO_ORDER","profitCenter":"P0069","bundleProducts":[],"mle":null,"dse":null,"mlf":null,"dsf":null,"accuracyLevel":null,"adhesiveStrength":null,"angle":null,"angle2":null,"clampingRange":null,"coding":null,"connectionType":null,"connectionTypeOut":null,"diameter":null,"diameterD1":null,"diameterD2":null,"diameterD3":null,"dimA":null,"dimB":null,"dimC":null,"dimD":null,"dimE":null,"dimF":null,"dimG":null,"dimH":null,"distance":null,"edgeLength":null,"extensionType":null,"format":null,"grid":null,"height":null,"length":null,"l1":null,"lh":null,"lv":null,"measuringSystem":["O-INSPECT","DuraMax"],"magnetic":null,"material":null,"ml":null,"mlg":null,"mlh":null,"measuringVolumeX":null,"measuringForce":null,"measuringSystemType":null,"numberPositions":null,"opticalCharacteristics":null,"outerDiameter":null,"plateThickness":null,"pointDiameter":null,"pointThickness":null,"quantityPieces":null,"radiusR":null,"shaftDiameter":null,"shaftLength":null,"shaftMaterial":null,"stylusTip":null,"stylusTipMaterial":null,"stylusType":null,"temperatureResistant":null,"threadG1":null,"threadG2":null,"weight":null,"width":null,"dsg":null,"dg":null,"ds":null,"dk":null},{"productType":"HARDWARE_DEFAULT","id":"b196e2a9-8b40-4df1-8ab8-ea853f30e025","sku":"626106-9340-030","name":"METROTOM Check Set nano","productName":"METROTOM Check Set nano","price":{"value":19864,"currencyCode":"EUR"},"images":[{"url":"https://dam.zeiss.com/e5f3c6ad-58b6-4840-aa00-b381012cc42c/Original%20file.jpg","label":"pdp-1001"}],"previewImage":{"url":"https://dam.zeiss.com/e5f3c6ad-58b6-4840-aa00-b381012cc42c/Original%20file.jpg","label":"preview"},"assets":[{"contentType":"application/pdf","url":"https://dam.zeiss.com/5235502c-fd8c-43c0-a2f3-b38300de645c/Original%20file.pdf","name":"BA_METROTOM_Check_Nano_REV_1.0_de_392584_0"},{"contentType":"application/pdf","url":"https://dam.zeiss.com/55ec8fb6-793a-491f-a4a0-b3840185c813/Original%20file.pdf","name":"BA_METROTOM_Check_Nano_REV_1.1_en_407028_0"}],"productHighlights":["the world's smallest CT test specimen according to VDI 2630","test specimens, calibration and evaluation software from a single source","Check the deviation SD in the smallest possible volume range"],"productAdvantages":["22 high-precision ruby spheres glued to 3.9mm diameter in the room","Calibration uncertainty ≤ 0,08µm","Includes a set of carbon fiber extensions that allow application to any Metrotom 800 and 1500 measurement system"],"productInformation":"METROTOM check nano\nfor METROTOM 800\n - incl. 22 spheres, diameter 300 µm,\n on quartz glass with CFRP extensions\n\nTest body for the interim testing of a CT system,\nfor determining the deviation SD according to VDI/VDE2630,\nconsisting of a flexurally rigid device with\nPrecision balls mounted on a base body of quartz glass.\n\nIncluded with the supply\n - Acrylic glass cover\n - CALYPSO test plan on a data carrier\n - Operating instructions\n - highly accurate tactile calibration including certificate\n - Transport case","productHint":"ZEISS Calypso is required for evaluation.\nMS Excel is required for evaluation.","webshopShortDescription":"METROTOM Check Set nano","webshopLongDescription":null,"pimProductType":null,"application":null,"productApplication":"The CT Check Nano is used for intermediate testing METROTOM 800 machines according to VDI/VDE 2630\n\nThe accuracy monitoring of your measuring device gives you confidence in your measurement values and security for the next quality audit. Every measuring instrument should be regularly monitored according to the ISO 9000 standard series.\nUsing a CALYPSO measurement plan and MS-Excel , an evaluating between calibration values and measured values are compared.\nThe process is straightforward and fast, so that you can check your Metrotom within a short time without additional training.\n22 spheres are positioned in the measuring volume allowing to evaluate 25 measuring lengths distributed for VDI 2630 compliance.","productSlug":"626106-9340-030-set-mtc-nano","relatedProducts":[{"key":"626106-9214-000","sorting":10},{"key":"626106-9215-000","sorting":20},{"key":"626106-9310-000","sorting":30}],"availabilityStatus":"MADE_TO_ORDER","profitCenter":"P0069","bundleProducts":[],"mle":null,"dse":null,"mlf":null,"dsf":null,"accuracyLevel":null,"adhesiveStrength":null,"angle":null,"angle2":null,"clampingRange":null,"coding":null,"connectionType":null,"connectionTypeOut":null,"diameter":null,"diameterD1":null,"diameterD2":null,"diameterD3":null,"dimA":null,"dimB":null,"dimC":null,"dimD":null,"dimE":null,"dimF":null,"dimG":null,"dimH":null,"distance":null,"edgeLength":null,"extensionType":null,"format":null,"grid":null,"height":null,"length":null,"l1":null,"lh":null,"lv":null,"measuringSystem":["METROTOM 1500","METROTOM 800"],"magnetic":null,"material":null,"ml":null,"mlg":null,"mlh":null,"measuringVolumeX":null,"measuringForce":null,"measuringSystemType":null,"numberPositions":null,"opticalCharacteristics":null,"outerDiameter":null,"plateThickness":null,"pointDiameter":null,"pointThickness":null,"quantityPieces":null,"radiusR":null,"shaftDiameter":null,"shaftLength":null,"shaftMaterial":null,"stylusTip":null,"stylusTipMaterial":null,"stylusType":null,"temperatureResistant":null,"threadG1":null,"threadG2":null,"weight":null,"width":null,"dsg":null,"dg":null,"ds":null,"dk":null},{"productType":"HARDWARE_DEFAULT","id":"e172ceb9-c939-4cc9-82df-f9f833992bc9","sku":"626001-0100-100","name":"Flight case for CMM Check","productName":"Flight case for CMM Check","price":{"value":645,"currencyCode":"EUR"},"images":[],"previewImage":null,"assets":[],"productHighlights":["Safe storage and transport","Aluminum case for optimal ratio of protection and weight","Tailored luggage inlay"],"productAdvantages":["Safe storage and transport","Aluminum case for optimal ratio of protection and weight","Tailored luggage inlay"],"productInformation":"Flightcase for CMM-Check","productHint":"External damage to the case does not result in any restriction of the protective properties.","webshopShortDescription":"Flight case for CMM Check","webshopLongDescription":null,"pimProductType":"Transportation Case","application":"Check","productApplication":"Test specimens are equipped with highly sensitive normals which are subject to regular recalibration.\nThese standards must be specially protected both on site in the measuring room and on the way to the calibration laboratory, so that no damage occurs.\nThe suitcase with a tailored inlay offers the optimal ratio of weight to protective properties for these two cases. This allows fast flight transport to and from the calibration laboratory without any risk of this having an influence on the calibration values.","productSlug":"626001-0100-100-flightcase-for-cmm-check","relatedProducts":[],"availabilityStatus":"EXPECTED_SOON","profitCenter":"P0067","bundleProducts":[],"mle":null,"dse":null,"mlf":null,"dsf":null,"accuracyLevel":null,"adhesiveStrength":null,"angle":null,"angle2":null,"clampingRange":null,"coding":null,"connectionType":null,"connectionTypeOut":null,"diameter":null,"diameterD1":null,"diameterD2":null,"diameterD3":null,"dimA":null,"dimB":null,"dimC":null,"dimD":null,"dimE":null,"dimF":null,"dimG":null,"dimH":null,"distance":null,"edgeLength":null,"extensionType":null,"format":null,"grid":null,"height":null,"length":null,"l1":null,"lh":null,"lv":null,"measuringSystem":[],"magnetic":null,"material":null,"ml":null,"mlg":null,"mlh":null,"measuringVolumeX":null,"measuringForce":null,"measuringSystemType":null,"numberPositions":null,"opticalCharacteristics":null,"outerDiameter":null,"plateThickness":null,"pointDiameter":null,"pointThickness":null,"quantityPieces":null,"radiusR":null,"shaftDiameter":null,"shaftLength":null,"shaftMaterial":null,"stylusTip":null,"stylusTipMaterial":null,"stylusType":null,"temperatureResistant":null,"threadG1":null,"threadG2":null,"weight":null,"width":null,"dsg":null,"dg":null,"ds":null,"dk":null},{"productType":"HARDWARE_DEFAULT","id":"110aa9d4-c30f-4a2f-a399-432312c18fb0","sku":"626106-9355-610","name":"CMM-Check 3.0 Artifact","productName":"Calibration artifacts","price":{"value":19249,"currencyCode":"EUR"},"images":[{"url":"https://dam.zeiss.com/1cbd012f-6602-4380-83fe-b36f013ba1a4/Original%20file.png","label":"pdp-1001"}],"previewImage":{"url":"https://dam.zeiss.com/1cbd012f-6602-4380-83fe-b36f013ba1a4/Original%20file.png","label":"preview"},"assets":[],"productHighlights":[],"productAdvantages":[],"productInformation":"$33","productHint":"It is recommended to calibrate this artifact every two years.","webshopShortDescription":"CMM-Check 3.0 Artifact","webshopLongDescription":null,"pimProductType":"Artifacts","application":null,"productApplication":"CMM-Check 3.0 is a complete artifact and software solution used to verify and monitor the accuracy of performance level CMMs between annual calibrations. Checking the CMM accuracy can be added to a quality routine or performed after collisions, environmental changes or system changes. The check provides immediate notice of accuracy errors.","productSlug":"626106-9355-610-artifact-cmm-check-30","relatedProducts":[],"availabilityStatus":"OUT_OF_STOCK","profitCenter":"P0069","bundleProducts":[],"mle":null,"dse":null,"mlf":null,"dsf":null,"accuracyLevel":null,"adhesiveStrength":null,"angle":null,"angle2":null,"clampingRange":null,"coding":null,"connectionType":null,"connectionTypeOut":null,"diameter":null,"diameterD1":null,"diameterD2":null,"diameterD3":null,"dimA":null,"dimB":null,"dimC":null,"dimD":null,"dimE":null,"dimF":null,"dimG":null,"dimH":null,"distance":null,"edgeLength":null,"extensionType":null,"format":null,"grid":null,"height":null,"length":null,"l1":null,"lh":null,"lv":null,"measuringSystem":[],"magnetic":null,"material":null,"ml":null,"mlg":null,"mlh":null,"measuringVolumeX":null,"measuringForce":null,"measuringSystemType":null,"numberPositions":null,"opticalCharacteristics":null,"outerDiameter":null,"plateThickness":null,"pointDiameter":null,"pointThickness":null,"quantityPieces":null,"radiusR":null,"shaftDiameter":null,"shaftLength":null,"shaftMaterial":null,"stylusTip":null,"stylusTipMaterial":null,"stylusType":null,"temperatureResistant":null,"threadG1":null,"threadG2":null,"weight":null,"width":null,"dsg":null,"dg":null,"ds":null,"dk":null},{"productType":"HARDWARE_DEFAULT","id":"3fbea5e9-46e3-4239-9192-ced493e5e52d","sku":"626106-9355-622","name":"Pro-Check 1.0 RT Artifact Holder","productName":"Calibration artifacts","price":{"value":18038,"currencyCode":"EUR"},"images":[{"url":"https://dam.zeiss.com/19568f34-8c70-43ae-80b1-b36f013b973d/Original%20file.png","label":"pdp-1001"}],"previewImage":{"url":"https://dam.zeiss.com/19568f34-8c70-43ae-80b1-b36f013b973d/Original%20file.png","label":"preview"},"assets":[],"productHighlights":[],"productAdvantages":[],"productInformation":"$34","productHint":"Step gauges for determining the length measurement deviation are not included.\n\nIt is recommended to calibrate this artifact every two years.","webshopShortDescription":"Pro-Check 1.0 RT Artifact Holder","webshopLongDescription":null,"pimProductType":"Artifacts","application":null,"productApplication":"Pro-Check 1.0 RT Artifact Holder is used when providing independent step gauges. This device includes other rotary table and roundness reference artifacts and provides more flexibility and benefits of a CMM-Check. \n\nThe Pro-Checks are used verify and monitor the accuracy of any CMM with a rotary table between annual calibrations. Checking the CMM accuracy can added to a quality routine or performed after collisions, environmental changes or system changes. The check provides immediate notice of accuracy errors.","productSlug":"626106-9355-622-artifact-pro-check-10-with-option-rt","relatedProducts":[],"availabilityStatus":"OUT_OF_STOCK","profitCenter":"P0069","bundleProducts":[],"mle":null,"dse":null,"mlf":null,"dsf":null,"accuracyLevel":null,"adhesiveStrength":null,"angle":null,"angle2":null,"clampingRange":null,"coding":null,"connectionType":null,"connectionTypeOut":null,"diameter":null,"diameterD1":null,"diameterD2":null,"diameterD3":null,"dimA":null,"dimB":null,"dimC":null,"dimD":null,"dimE":null,"dimF":null,"dimG":null,"dimH":null,"distance":null,"edgeLength":null,"extensionType":null,"format":null,"grid":null,"height":null,"length":null,"l1":null,"lh":null,"lv":null,"measuringSystem":[],"magnetic":null,"material":null,"ml":null,"mlg":null,"mlh":null,"measuringVolumeX":null,"measuringForce":null,"measuringSystemType":null,"numberPositions":null,"opticalCharacteristics":null,"outerDiameter":null,"plateThickness":null,"pointDiameter":null,"pointThickness":null,"quantityPieces":null,"radiusR":null,"shaftDiameter":null,"shaftLength":null,"shaftMaterial":null,"stylusTip":null,"stylusTipMaterial":null,"stylusType":null,"temperatureResistant":null,"threadG1":null,"threadG2":null,"weight":null,"width":null,"dsg":null,"dg":null,"ds":null,"dk":null},{"productType":"HARDWARE_DEFAULT","id":"f886191e-601a-420d-b892-350bacca9003","sku":"626106-9355-621","name":"Pro-Check 1.0 Artifact Holder","productName":"Calibration artifacts","price":{"value":16032,"currencyCode":"EUR"},"images":[{"url":"https://dam.zeiss.com/204b8d3d-8a3f-4a44-8c36-b36f013b8a4b/Original%20file.png","label":"pdp-1001"}],"previewImage":{"url":"https://dam.zeiss.com/204b8d3d-8a3f-4a44-8c36-b36f013b8a4b/Original%20file.png","label":"preview"},"assets":[],"productHighlights":[],"productAdvantages":[],"productInformation":"$35","productHint":"Step gauges for determining the length measurement deviation are not included.\n\nIt is recommended to calibrate this artifact every two years.","webshopShortDescription":"Pro-Check 1.0 Artifact Holder","webshopLongDescription":null,"pimProductType":"Artifacts","application":null,"productApplication":"Pro-Check 1.0 Artifact Holder is used when providing independent step gauges. This device includes other roundness reference artifacts and provides more flexibility and benefits of a CMM-Check. \n\nThe Pro-Checks are used verify and monitor the accuracy of any CMM between annual calibrations. Checking the CMM accuracy can be added to a quality routine or performed after collisions, environmental changes or system changes. The check provides immediate notice of accuracy errors.","productSlug":"626106-9355-621-artifact-pro-check-10","relatedProducts":[],"availabilityStatus":"OUT_OF_STOCK","profitCenter":"P0069","bundleProducts":[],"mle":null,"dse":null,"mlf":null,"dsf":null,"accuracyLevel":null,"adhesiveStrength":null,"angle":null,"angle2":null,"clampingRange":null,"coding":null,"connectionType":null,"connectionTypeOut":null,"diameter":null,"diameterD1":null,"diameterD2":null,"diameterD3":null,"dimA":null,"dimB":null,"dimC":null,"dimD":null,"dimE":null,"dimF":null,"dimG":null,"dimH":null,"distance":null,"edgeLength":null,"extensionType":null,"format":null,"grid":null,"height":null,"length":null,"l1":null,"lh":null,"lv":null,"measuringSystem":[],"magnetic":null,"material":null,"ml":null,"mlg":null,"mlh":null,"measuringVolumeX":null,"measuringForce":null,"measuringSystemType":null,"numberPositions":null,"opticalCharacteristics":null,"outerDiameter":null,"plateThickness":null,"pointDiameter":null,"pointThickness":null,"quantityPieces":null,"radiusR":null,"shaftDiameter":null,"shaftLength":null,"shaftMaterial":null,"stylusTip":null,"stylusTipMaterial":null,"stylusType":null,"temperatureResistant":null,"threadG1":null,"threadG2":null,"weight":null,"width":null,"dsg":null,"dg":null,"ds":null,"dk":null},{"productType":"HARDWARE_DEFAULT","id":"385d9aa8-9643-427d-8aee-d832b80df7b9","sku":"626106-9355-507","name":"CMM Check 1.0 Multi Feature Mini, calibrated (Software not included)","productName":"CMM Check 1.0 Multi Feature Mini, calibrated (Software not included)","price":{"value":6314,"currencyCode":"EUR"},"images":[{"url":"https://dam.zeiss.com/a1924ace-0fdd-49d6-b679-b38100ae0679/Original%20file.png","label":"pdp-1001"}],"previewImage":{"url":"https://dam.zeiss.com/a1924ace-0fdd-49d6-b679-b38100ae0679/Original%20file.png","label":"preview"},"assets":[],"productHighlights":["Simple determination of measurement uncertainty related to the test characteristics","including DAkkS calibration","test specimens and calibration from a single source","cured surfaces result in a long service life"],"productAdvantages":["Simple determination of measurement uncertainty related to the test characteristics","including DAkkS calibration","test specimens and calibration from a single source, cured surfaces result in a long service life"],"productInformation":"Dimensions of the cylindrical body: \nLength: 100mm\nDiameter: 50mm\n\nAt the heart of the multi-feature check is a universal test specimen, which consists of a cylindrical basic body with different geometric elements, as they occur on typical workpieces of medium size:\n- cylindrical bore with different diameters and depths\n- One hole circle\n- A short cone with a large opening angle and a long cone with a small opening angle\n- Three flat surfaces, one of which is inclined\n- cylindrical surface of the base body\n- including DAkkS calibration","productHint":"The software is not included and must be purchased separately.\nA software license is required for each coordinate measuring device.","webshopShortDescription":"CMM Check 1.0 Multi Feature Mini, calibrated (Software not included)","webshopLongDescription":null,"pimProductType":"Artifacts","application":"Check","productApplication":"$36","productSlug":"626106-9355-507-artifact-multi-feature-check-mini-calibr","relatedProducts":[],"availabilityStatus":"OUT_OF_STOCK","profitCenter":"P0060","bundleProducts":[],"mle":null,"dse":null,"mlf":null,"dsf":null,"accuracyLevel":null,"adhesiveStrength":null,"angle":null,"angle2":null,"clampingRange":null,"coding":null,"connectionType":null,"connectionTypeOut":null,"diameter":null,"diameterD1":null,"diameterD2":null,"diameterD3":null,"dimA":null,"dimB":null,"dimC":null,"dimD":null,"dimE":null,"dimF":null,"dimG":null,"dimH":null,"distance":null,"edgeLength":null,"extensionType":null,"format":null,"grid":null,"height":null,"length":null,"l1":null,"lh":null,"lv":null,"measuringSystem":[],"magnetic":null,"material":null,"ml":null,"mlg":null,"mlh":null,"measuringVolumeX":null,"measuringForce":null,"measuringSystemType":null,"numberPositions":null,"opticalCharacteristics":null,"outerDiameter":null,"plateThickness":null,"pointDiameter":null,"pointThickness":null,"quantityPieces":null,"radiusR":null,"shaftDiameter":null,"shaftLength":null,"shaftMaterial":null,"stylusTip":null,"stylusTipMaterial":null,"stylusType":null,"temperatureResistant":null,"threadG1":null,"threadG2":null,"weight":null,"width":null,"dsg":null,"dg":null,"ds":null,"dk":null},{"productType":"HARDWARE_DEFAULT","id":"a0c7f28a-8eec-4943-8904-4df44763eca2","sku":"626106-9355-612","name":"CMM-Check 3.0 RT Artifact","productName":"Calibration artifacts","price":{"value":21254,"currencyCode":"EUR"},"images":[{"url":"https://dam.zeiss.com/953845ad-207e-45b9-afb0-b36f013ba976/Original%20file.png","label":"pdp-1001"}],"previewImage":{"url":"https://dam.zeiss.com/953845ad-207e-45b9-afb0-b36f013ba976/Original%20file.png","label":"preview"},"assets":[],"productHighlights":[],"productAdvantages":[],"productInformation":"$37","productHint":"It is recommended to calibrate this artifact every two years.","webshopShortDescription":"CMM-Check 3.0 RT Artifact","webshopLongDescription":null,"pimProductType":"Artifacts","application":null,"productApplication":"CMM-Check 3.0 RT is a complete artifact and software solution used to verify and monitor the accuracy of entry Performance CMMs with AB rotary tables between annual calibrations. Checking the CMM accuracy can be added to a quality routine or performed after collisions, environmental changes or system changes. The check provides immediate notice of accuracy errors.","productSlug":"626106-9355-612-artifact-cmm-check-30-with-option-rt","relatedProducts":[],"availabilityStatus":"OUT_OF_STOCK","profitCenter":"P0069","bundleProducts":[],"mle":null,"dse":null,"mlf":null,"dsf":null,"accuracyLevel":null,"adhesiveStrength":null,"angle":null,"angle2":null,"clampingRange":null,"coding":null,"connectionType":null,"connectionTypeOut":null,"diameter":null,"diameterD1":null,"diameterD2":null,"diameterD3":null,"dimA":null,"dimB":null,"dimC":null,"dimD":null,"dimE":null,"dimF":null,"dimG":null,"dimH":null,"distance":null,"edgeLength":null,"extensionType":null,"format":null,"grid":null,"height":null,"length":null,"l1":null,"lh":null,"lv":null,"measuringSystem":[],"magnetic":null,"material":null,"ml":null,"mlg":null,"mlh":null,"measuringVolumeX":null,"measuringForce":null,"measuringSystemType":null,"numberPositions":null,"opticalCharacteristics":null,"outerDiameter":null,"plateThickness":null,"pointDiameter":null,"pointThickness":null,"quantityPieces":null,"radiusR":null,"shaftDiameter":null,"shaftLength":null,"shaftMaterial":null,"stylusTip":null,"stylusTipMaterial":null,"stylusType":null,"temperatureResistant":null,"threadG1":null,"threadG2":null,"weight":null,"width":null,"dsg":null,"dg":null,"ds":null,"dk":null},{"productType":"HARDWARE_DEFAULT","id":"0359a941-a342-49bf-8777-e9983f7ae8e8","sku":"626106-9355-508","name":"O-INSPECT-Check 1.0 Artifact (Software not included)","productName":"CMM Check 1.0 O-INSPECT, calibrated (Software not included)","price":{"value":12639,"currencyCode":"EUR"},"images":[{"url":"https://dam.zeiss.com/5e0a8b4e-3c51-4780-8ae3-b38100b741c8/Original%20file.png","label":"pdp-1001"}],"previewImage":{"url":"https://dam.zeiss.com/5e0a8b4e-3c51-4780-8ae3-b38100b741c8/Original%20file.png","label":"preview"},"assets":[],"productHighlights":[],"productAdvantages":["Specially developed for the ZEISS O-INSPECT","Artifact and calibration from a single source","Inspection of the optical and tactile sensor","Selected standards with high accuracy","Easy handling thanks to compact design"],"productInformation":"Suitable for O-INSPECT 543 and 863 CMMs\n\nNot suitable for O-INSPECT 322 , O-DETECT or O-INSPECT duo and O-INSPECT with scout sensors. \n\nPackage includes:\n\n - 2 Gauge Blocks, Length 50, and 200 mm\n - Setting ring for tactile and optical measurements, diameter 16 mm\n - Sphere, Diameter 25 mm\n- Glass scale with graduated markings and circles, length 200 mm\n - Robust transport case with lock and foam insert\n - Accredited calibration of all standards in accordance with DIN EN ISO/IEC 17025\n\nRemote online training (626106-9355-641) is also available for an additional cost.","productHint":"Not suitable for O-INSPECT duo and O-INSPECT with scout sensors. \n\nCMM Monitoring Tool evaluation software is sold separately. Product ID 626001-0830-020. A PC Bonded software license is required for each VMM.\n\nIt is recommended to calibrate this artifact every two years.","webshopShortDescription":"O-INSPECT-Check 1.0 Artifact (Software not included)","webshopLongDescription":null,"pimProductType":"Artifacts","application":"Check","productApplication":"O-INSPECT-Check 1.0 is a complete artifact and software solution used to verify and monitor the accuracy of Optical VMMs between annual calibrations. Checking the CMM accuracy can be added to a quality routine or performed after collisions, environmental changes or system changes. The check provides immediate notice of accuracy errors.","productSlug":"626106-9355-508-artifact-multisensor-check-calibrated","relatedProducts":[],"availabilityStatus":"OUT_OF_STOCK","profitCenter":"P0060","bundleProducts":[],"mle":null,"dse":null,"mlf":null,"dsf":null,"accuracyLevel":null,"adhesiveStrength":null,"angle":null,"angle2":null,"clampingRange":null,"coding":null,"connectionType":null,"connectionTypeOut":null,"diameter":null,"diameterD1":null,"diameterD2":null,"diameterD3":null,"dimA":null,"dimB":null,"dimC":null,"dimD":null,"dimE":null,"dimF":null,"dimG":null,"dimH":null,"distance":null,"edgeLength":null,"extensionType":null,"format":null,"grid":null,"height":null,"length":null,"l1":null,"lh":null,"lv":null,"measuringSystem":["O-INSPECT"],"magnetic":null,"material":null,"ml":null,"mlg":null,"mlh":null,"measuringVolumeX":null,"measuringForce":null,"measuringSystemType":null,"numberPositions":null,"opticalCharacteristics":null,"outerDiameter":null,"plateThickness":null,"pointDiameter":null,"pointThickness":null,"quantityPieces":null,"radiusR":null,"shaftDiameter":null,"shaftLength":null,"shaftMaterial":null,"stylusTip":null,"stylusTipMaterial":null,"stylusType":null,"temperatureResistant":null,"threadG1":null,"threadG2":null,"weight":null,"width":null,"dsg":null,"dg":null,"ds":null,"dk":null}],"pagination":{"page":1,"pageSize":12,"total":14},"sort":{"field":"availabilityStatus","order":"asc"},"hiddenAttributes":[],"hasError":false,"originalSectionObject":{"type":"IQS-Section","referenceTitle":"ProductList","headline":"Product list","contents":[{"type":"IQS-View","referenceTitle":"ProductsView","labels":[],"staticLabels":[{"type":"IQS-Label","referenceTitle":"VatText","label":"excluding VAT"},{"type":"IQS-Label","referenceTitle":"CollapseText","label":"Collapse"},{"type":"IQS-Label","referenceTitle":"OverallText","label":"Overall"},{"type":"IQS-Label","referenceTitle":"PageText","label":"Page"},{"type":"IQS-Label","referenceTitle":"EntriesText","label":"entries"},{"type":"IQS-Label","referenceTitle":"OfText","label":"of"},{"type":"IQS-Label","referenceTitle":"ShowText","label":"Showing"},{"type":"IQS-Label","referenceTitle":"EntryText","label":"{count, plural, =1 {entry} other {entries}}"},{"type":"IQS-Label","referenceTitle":"ItemText","label":"{count, plural, =1 {item} other {items}}"},{"type":"IQS-Label","referenceTitle":"ItemPluralText","label":"items"},{"type":"IQS-Label","referenceTitle":"SystemIntegrationText","label":"System Integration"},{"type":"IQS-Label","referenceTitle":"PrimaryDimensionsText","label":"Primary Dimensions"},{"type":"IQS-Label","referenceTitle":"DetailedSpecificationsText","label":"Detailed Specifications"},{"type":"IQS-Label","referenceTitle":"StylusTipText","label":"Stylus tip"},{"type":"IQS-Label","referenceTitle":"StylusShaftText","label":"Stylus shaft"},{"type":"IQS-Label","referenceTitle":"MediaText","label":"Document & media"},{"type":"IQS-Label","referenceTitle":"ApplicationText","label":"Application"},{"type":"IQS-Label","referenceTitle":"DetailsText","label":"Details"},{"type":"IQS-Label","referenceTitle":"ItemsText","label":"Item(s)"},{"type":"IQS-Label","referenceTitle":"ScopeOfDeliveryText","label":"Scope of delivery ({count, plural, =1 {1 item} other {# items}})"},{"type":"IQS-Label","referenceTitle":"SystemApplicationAndPackagingText","label":"System application and packaging"},{"type":"IQS-Label","referenceTitle":"MaterialProperties","label":"Material Properties"},{"type":"IQS-Label","referenceTitle":"GeometryAndDimensions","label":"Geometry and Dimensions"},{"type":"IQS-Label","referenceTitle":"ShowAllText","label":"Show all"},{"type":"IQS-Label","referenceTitle":"PriceOnRequestText","label":"Price on request"}],"actions":[{"type":"IQS-Button","referenceTitle":"AddToQuoteButton","label":"Add to quote"},{"type":"IQS-Button","referenceTitle":"ProductDetailsCta","label":"Show product details"},{"type":"IQS-Button","referenceTitle":"AddToCartButton","label":"Add to cart"},{"type":"IQS-Button","referenceTitle":"SwitchToListViewButton","label":"Switch to list view","description":"Switch to list view"},{"type":"IQS-Button","referenceTitle":"SwitchToCardViewButton","label":"Switch to card view","description":"Switch to card view"},{"type":"IQS-Button","referenceTitle":"ContactUsButton","label":"Do you have questions?","link":{"type":"Global Link","referenceTitle":"ContactUsLink","url":"https://www.zeiss.com/metrology-store/contact","text":"Contact Us","target":"_blank"}},{"type":"IQS-Select","referenceTitle":"SortByButton","label":"Sort by","selectionLabel":"Sort by: {value}","options":[{"type":"IQS-Label","referenceTitle":"SortByAvailabilityOption","label":"Availability"},{"type":"IQS-Label","referenceTitle":"SortByPriceHighToLowOption","label":"Price (high to low)"},{"type":"IQS-Label","referenceTitle":"SortByPriceLowToHighOption","label":"Price (low to high)"}]}],"product":{"type":"IQS-Product","referenceTitle":"ProductAttributes","attributes":[{"type":"IQS-Product-Attribute","referenceTitle":"Angle","shortName":"Angle 1(W1)","longName":"Angle 1(W1)"},{"type":"IQS-Product-Attribute","referenceTitle":"MeasurementLength","shortName":"Measurement length (ML)","longName":"Measurement length (ML)"},{"type":"IQS-Product-Attribute","referenceTitle":"DShaft","shortName":"Ø Shaft (DS)","longName":"Ø Shaft (DS)"},{"type":"IQS-Product-Attribute","referenceTitle":"DSphere","shortName":"Ø Sphere (DK)","longName":"Diameter sphere (DK)"},{"type":"IQS-Product-Attribute","referenceTitle":"TipMaterial","shortName":"Tip material","longName":"Tip material"},{"type":"IQS-Product-Attribute","referenceTitle":"MeasuringLengthF","shortName":"3. Measuring Length (MLF)","longName":"3rd measurement length (MLF)"},{"type":"IQS-Product-Attribute","referenceTitle":"DShaftE","shortName":"Ø 2. Shaft (DSE)","longName":"2nd shaft diameter (DSE)"},{"type":"IQS-Product-Attribute","referenceTitle":"DBody","shortName":"Ø Body (DG)","longName":"Ø Body (DG)"},{"type":"IQS-Product-Attribute","referenceTitle":"Weight","shortName":"Weight","longName":"Weight"},{"type":"IQS-Product-Attribute","referenceTitle":"Length","shortName":"Length (L)","longName":"Length (L)"},{"type":"IQS-Product-Attribute","referenceTitle":"Width","shortName":"Width (B)","longName":"Width (B)"},{"type":"IQS-Product-Attribute","referenceTitle":"DShaftF","shortName":"Ø 3. Shaft (DSF)","longName":"3rd shaft diameter (DSF)"},{"type":"IQS-Product-Attribute","referenceTitle":"MeasuringLengthE","shortName":"2. Measuring length (MLE)","longName":"2nd Measurement length (MLE)"},{"type":"IQS-Product-Attribute","referenceTitle":"Price","shortName":"Price","longName":"Price"},{"type":"IQS-Product-Attribute","referenceTitle":"ConnectionType","shortName":"Connection Type","longName":"Connection Type"},{"type":"IQS-Product-Attribute","referenceTitle":"MaterialNumber","shortName":"Material number","longName":"Material number"},{"type":"IQS-Product-Attribute","referenceTitle":"StylusType","shortName":"Stylus type","longName":"Stylus type"},{"type":"IQS-Product-Attribute","referenceTitle":"ShaftMaterial","shortName":"Shaft material","longName":"Shaft material"},{"type":"IQS-Product-Attribute","referenceTitle":"TipGeometry","shortName":"Tip geometry","longName":"Tip geometry"},{"type":"IQS-Product-Attribute","referenceTitle":"ProductInformation","shortName":"Product information","longName":"Product information"},{"type":"IQS-Product-Attribute","referenceTitle":"Application","shortName":"Application","longName":"Application"},{"type":"IQS-Product-Attribute","referenceTitle":"ProductType","shortName":"Product type","longName":"Product type"},{"type":"IQS-Product-Attribute","referenceTitle":"MeasuringSensor","shortName":"Measuring sensor","longName":"Measuring sensor"},{"type":"IQS-Product-Attribute","referenceTitle":"Availability","shortName":"Availability","longName":"Availability"},{"type":"IQS-Product-Attribute","referenceTitle":"NumberPositions","shortName":"Number positions","longName":"Number positions"},{"type":"IQS-Product-Attribute","referenceTitle":"MeasurementLengthG","shortName":"Measurement length (MLG)","longName":"Measurement length (MLG)"},{"type":"IQS-Product-Attribute","referenceTitle":"MeasurementLengthH","shortName":"Measurement length (MLH)","longName":"Measurement length (MLH)"},{"type":"IQS-Product-Attribute","referenceTitle":"AccuracyLevel","shortName":"Accuracy level","longName":"Accuracy level"},{"type":"IQS-Product-Attribute","referenceTitle":"ConnectionTypeOut","shortName":"Connection Type Out","longName":"Connection Type Out"},{"type":"IQS-Product-Attribute","referenceTitle":"Angle2","shortName":"Angle 2(W2)","longName":"Angle 2(W2)"},{"type":"IQS-Product-Attribute","referenceTitle":"Material","shortName":"Material","longName":"Material"},{"type":"IQS-Product-Attribute","referenceTitle":"ExtensionType","shortName":"Extension type","longName":"Extension type"},{"type":"IQS-Product-Attribute","referenceTitle":"TemperatureResistant","shortName":"Temperature resistant","longName":"Temperature resistant"},{"type":"IQS-Product-Attribute","referenceTitle":"OpticalCharacteristics","shortName":"Optical Characteristics ","longName":"Optical Characteristics "},{"type":"IQS-Product-Attribute","referenceTitle":"Magnetic","shortName":"Magnetic","longName":"Magnetic"},{"type":"IQS-Product-Attribute","referenceTitle":"AdhesiveStrength","shortName":"Adhesive Strength","longName":"Adhesive Strength"},{"type":"IQS-Product-Attribute","referenceTitle":"MeasuringForce","shortName":"Measuring force","longName":"Measuring force"},{"type":"IQS-Product-Attribute","referenceTitle":"ThreadG1","shortName":"Thread (G1)","longName":"Thread (G1)"},{"type":"IQS-Product-Attribute","referenceTitle":"ThreadG2","shortName":"Thread (G2)","longName":"Thread (G2)"},{"type":"IQS-Product-Attribute","referenceTitle":"Height","shortName":"Height (H)","longName":"Height (H)"},{"type":"IQS-Product-Attribute","referenceTitle":"Radius","shortName":"Radius (R)","longName":"Radius (R)"},{"type":"IQS-Product-Attribute","referenceTitle":"LH","shortName":"LH","longName":"LH"},{"type":"IQS-Product-Attribute","referenceTitle":"LV","shortName":"LV","longName":"LV"},{"type":"IQS-Product-Attribute","referenceTitle":"Length1","shortName":"Length 1 (L1)","longName":"Length 1 (L1)"},{"type":"IQS-Product-Attribute","referenceTitle":"Diameter1","shortName":"Diameter (D1)","longName":"Diameter (D1)"},{"type":"IQS-Product-Attribute","referenceTitle":"Diameter2","shortName":"Diameter (D2)","longName":"Diameter (D2)"},{"type":"IQS-Product-Attribute","referenceTitle":"Diameter3","shortName":"Diameter (D3)","longName":"Diameter (D3)"},{"type":"IQS-Product-Attribute","referenceTitle":"Dsg","shortName":"Ø 4. Shaft (DSG)","longName":"Ø 4. Shaft (DSG)"},{"type":"IQS-Product-Attribute","referenceTitle":"DimensionA","shortName":"Dimension A","longName":"Dimension A"},{"type":"IQS-Product-Attribute","referenceTitle":"DimensionB","shortName":"Dimension B","longName":"Dimension B"},{"type":"IQS-Product-Attribute","referenceTitle":"DimensionC","shortName":"Dimension C","longName":"Dimension C"},{"type":"IQS-Product-Attribute","referenceTitle":"DimensionD","shortName":"Dimension D","longName":"Dimension D"},{"type":"IQS-Product-Attribute","referenceTitle":"DimensionE","shortName":"Dimension E","longName":"Dimension E"},{"type":"IQS-Product-Attribute","referenceTitle":"DimensionF","shortName":"Dimension F","longName":"Dimension F"},{"type":"IQS-Product-Attribute","referenceTitle":"DimensionG","shortName":"Dimension G","longName":"Dimension G"},{"type":"IQS-Product-Attribute","referenceTitle":"DimensionH","shortName":"Dimension H","longName":"Dimension H"},{"type":"IQS-Product-Attribute","referenceTitle":"ClampingRange","shortName":"Clamping range","longName":"Clamping range"},{"type":"IQS-Product-Attribute","referenceTitle":"ShaftLength","shortName":"Shaft length","longName":"Shaft length"},{"type":"IQS-Product-Attribute","referenceTitle":"ShaftDiameter","shortName":"Shaft diameter","longName":"Shaft diameter"},{"type":"IQS-Product-Attribute","referenceTitle":"Quantity","shortName":"Quantity","longName":"Quantity"},{"type":"IQS-Product-Attribute","referenceTitle":"PointThickness","shortName":"Point thickness","longName":"Point thickness"},{"type":"IQS-Product-Attribute","referenceTitle":"PointDiameter","shortName":"Point diameter","longName":"Point diameter"},{"type":"IQS-Product-Attribute","referenceTitle":"PlateThickness","shortName":"Plate thickness","longName":"Plate thickness"},{"type":"IQS-Product-Attribute","referenceTitle":"OuterDiameter","shortName":"Outer diameter","longName":"Outer diameter"},{"type":"IQS-Product-Attribute","referenceTitle":"Machine","shortName":"Machine","longName":"Machine"},{"type":"IQS-Product-Attribute","referenceTitle":"Format","shortName":"Format","longName":"Format"},{"type":"IQS-Product-Attribute","referenceTitle":"EdgeLength","shortName":"Edge length","longName":"Edge length"},{"type":"IQS-Product-Attribute","referenceTitle":"Distance","shortName":"Distance","longName":"Distance"},{"type":"IQS-Product-Attribute","referenceTitle":"Diameter","shortName":"Diameter","longName":"Diameter"},{"type":"IQS-Product-Attribute","referenceTitle":"Coding","shortName":"Coding","longName":"Coding"}]}},{"type":"IQS-Teaser","referenceTitle":"ErrorResult","headline":"Something went wrong","shortDescription":"Please try loading the content again.","image":{"type":"Global Image","referenceTitle":"ErrorResultMedia","src":"https://zeiss.com/content/dam/content-fragments/iqs/shared-assets/error-images/filters-error.png","alt":"Styli list error illustration","width":600,"height":400,"format":"image/png","size":22317},"ctas":[{"type":"IQS-Button","referenceTitle":"ErrorResultRetryCta","label":"Retry"}]},{"type":"IQS-Teaser","referenceTitle":"SortingFailedToast","headline":"Sorting failed, please try again.","ctas":[]},{"type":"IQS-Teaser","referenceTitle":"AddToCartSuccessToast","headline":"{count, plural, =1 {1 item} other {# items}} added to cart","shortDescription":"You have {count, plural, =1 {1 item} other {# items}} in your cart. Subtotal: {price}","ctas":[{"type":"IQS-Button","referenceTitle":"ViewCartButton","label":"View cart"}]},{"type":"IQS-Teaser","referenceTitle":"AddToQuoteSuccessToast","headline":"{count, plural, =1 {1 item} other {# items}} added to quote","shortDescription":"You have {count, plural, =1 {1 item} other {# items}} in your quote list. Subtotal: {price}","ctas":[{"type":"IQS-Button","referenceTitle":"ViewQuoteButton","label":"View quote"}]},{"type":"IQS-Teaser","referenceTitle":"AddToCartFailedToast","headline":"Something went wrong with processing your action.","shortDescription":"Please try again later","ctas":[]},{"type":"IQS-Teaser","referenceTitle":"ProductNote","headline":"Product note","ctas":[]},{"type":"IQS-Group","referenceTitle":"AvailabilityStatus","headline":"MANDATORY HEADLINE MISSING!!!","contents":[{"type":"IQS-Tile","referenceTitle":"MadeToOrder","headline":"Made to order","description":"The item is not in stock. It will be produced for you when you order. The delivery time forecast is displayed in the shopping cart."},{"type":"IQS-Tile","referenceTitle":"LongerDeliveryTime","headline":"Longer delivery time","description":"The article is currently not available. We are working hard to make this item available to you again as soon as possible. The delivery time forecast is displayed in the shopping cart."},{"type":"IQS-Tile","referenceTitle":"ExpectedSoon","headline":"Expected soon","description":"Item is not in stock, but in the inflow. The item can be ordered, the delivery time forecast is displayed in the shopping cart."},{"type":"IQS-Tile","referenceTitle":"InStock","headline":"In stock","description":"Items in stock are shipped on the same day for orders placed on weekdays before 3 p.m. Please note the exact delivery date in your shopping cart."}]},{"type":"IQS-Teaser","referenceTitle":"EmptyProductResult","headline":"No match? Go custom.","shortDescription":"We can build what you can't find. Get in touch with our team to build exactly what you need.","image":{"type":"Global Image","referenceTitle":"ProductNotFoundMedia","src":"https://zeiss.com/content/dam/content-fragments/iqs/shared-assets/error-images/filters-search-not-found.png","alt":"Product not found illustration","width":600,"height":400,"format":"image/png","size":16237},"ctas":[{"type":"IQS-Button","referenceTitle":"ContactUsButton","label":"Contact us","link":{"type":"Global Link","referenceTitle":"ContactUsLink","url":"https://www.zeiss.com/metrology-store/contact","text":"Contact Us","target":"_blank"}},{"type":"IQS-Button","referenceTitle":"CopyFiltersButton","label":"Copy filters"}]},{"type":"IQS-Teaser","referenceTitle":"CopyFailedToast","headline":"Unable to copy","shortDescription":"Something went wrong on our end. Please try again.","ctas":[]},{"type":"IQS-Teaser","referenceTitle":"CopySuccessToast","headline":"Applied Filters Copied","shortDescription":"You can now paste these filters into contact form and share them with us.","ctas":[]},{"type":"IQS-Teaser","referenceTitle":"LoginExpiredToast","headline":"Your session has expired.","shortDescription":"For your security, please sign in again to continue.","ctas":[{"type":"IQS-Button","referenceTitle":"LoginButton","label":"Sign in"}]},{"type":"IQS-Teaser","referenceTitle":"AddToQuoteButtonTooltip","headline":"Oops! Each product per quote can only hold 100 items. You’ve added {count} already, please modify your quantity to continue.","ctas":[]},{"type":"IQS-Teaser","referenceTitle":"AddToCartButtonTooltip","headline":"Oops! Each product per order can only hold 100 items. You’ve added {count} already, please modify your quantity to continue.","ctas":[]},{"type":"IQS-Teaser","referenceTitle":"PriceNotAvailableToast","headline":"Prices are not available.","shortDescription":"Oops, there is something wrong while loading your customer prices. Please try again.","ctas":[{"type":"IQS-Button","referenceTitle":"TryAgainButton","label":"Try again"}]},{"type":"IQS-Teaser","referenceTitle":"CustomerPriceNotAvailableToast","headline":"Customer {count, plural, =1 {price is} other {prices are}} not available.","shortDescription":"Oops, there is something wrong {count, plural, =1 {loading your customer price for this product.} other {while loading your customer prices.}} Please try again.","ctas":[{"type":"IQS-Button","referenceTitle":"ReloadPageButton","label":"Reload page"}]}]}},{"type":"IQS-Section","referenceTitle":"Navigation","headline":"Navigation","contents":[{"type":"IQS-Group","referenceTitle":"Breadcrumbs","headline":"","contents":[{"type":"IQS-Button","referenceTitle":"Home","label":"Home"},{"type":"IQS-Button","label":"CMM","categorySlug":"3000000-cmm","categoryName":"CMM","categoryKey":"3000000_IQSHW"},{"type":"IQS-Button","label":"Reference & Check","categorySlug":"3220000-reference-check","categoryName":"Reference Check","categoryKey":"3220000_IQSHW"},{"type":"IQS-Button","label":"Calibration artifacts","categorySlug":"3223100-calibration-artifacts","categoryName":"Calibration artifacts","categoryKey":"3223100_IQSHW"}]}]},{"type":"IQS-Section","referenceTitle":"ContactUs","headline":"Contact us","contents":[{"type":"IQS-Tile","referenceTitle":"ApplicationSupport","icon":"CustomerSupport","headline":"Application Support","description":"Let our application engineers help you find the products you need.","cta":{"type":"Global Link","referenceTitle":"ApplicationSupportLink","url":"https://www.zeiss.com/metrology-store/application-support","text":"Application Support","target":"_blank"}},{"type":"IQS-Tile","referenceTitle":"QualityExcellenceCenter","icon":"LocationOn","headline":"ZEISS Quality Excellence Center","description":"Find a ZEISS location near you.","cta":{"type":"Global Link","referenceTitle":"QualityExcellenceCenterLink","url":"https://www.zeiss.com/metrology-store/quality-excellence-center","text":"ZEISS Quality Excellence Center","target":"_blank"}},{"type":"IQS-Tile","referenceTitle":"ContactForm","icon":"Files","headline":"Contact Form","description":"Leave a message how to best help you.","cta":{"type":"Global Link","referenceTitle":"ContactFormLink","url":"https://www.zeiss.com/metrology-store/contact","text":"Contact Form Link","target":"_blank"}},{"type":"IQS-Tile","referenceTitle":"CallUs","icon":"ContactPhone","headline":"Call us","description":"+358 (0)207 94 0890","cta":{"type":"Global Link","referenceTitle":"PhoneNumber","url":"tel:00358207940890","text":"+358 (0)207 94 0890","target":"_self"}},{"type":"IQS-Tile","referenceTitle":"EMailUs","icon":"Mail","headline":"E-Mail us","description":"sales.metrology.nordics@zeiss.com","cta":{"type":"Global Link","referenceTitle":"Email","url":"mailto:sales.metrology.nordics@zeiss.com","text":"sales.metrology.nordics@zeiss.com","target":"_self"}}]},{"type":"IQS-Section","referenceTitle":"ThreadTypeLayer","headline":"Stylus thread type","subHeadline":"M5, M3 XXT, M3 REN, M2, Without thread","contents":[{"type":"IQS-Teaser","referenceTitle":"M5","headline":"M5","subHeadline":"For ZEISS VAST probe system","description":"

Styli with M5 thread are the ideal choice for the ZEISS VAST probe system. With the appropriate connecting element, they can also be connected to other thread systems.

","image":{"type":"Global Image","referenceTitle":"M5Image","src":"https://zeiss.com/content/dam/content-fragments/iqs/shared-assets/hws/categories/cmm/cmm-attributes-explanation/thead-type-layer-section/m5.png","alt":"M5","width":1128,"height":564,"format":"image/png","size":149253},"ctas":[]},{"type":"IQS-Teaser","referenceTitle":"M3 XXT","headline":"M3 XXT","subHeadline":"For ZEISS RST measuring heads","description":"

Styli with M3 thread are particularly suitable for ZEISS RST measuring heads. With the appropriate connecting element, they can also be connected to other thread systems.

Caution: M3 and M3 XXT systems cannot be combined due to their different design (diameter adapter (DG) M3: 4mm; M3 XXT: 5mm); weak interfaces and incorrect measurements would be the result.

","image":{"type":"Global Image","referenceTitle":"M3 XXT Image","src":"https://zeiss.com/content/dam/content-fragments/iqs/shared-assets/hws/categories/cmm/cmm-attributes-explanation/thead-type-layer-section/m3-xxt.png","alt":"M3 XXT","width":1128,"height":564,"format":"image/png","size":108901},"ctas":[]},{"type":"IQS-Teaser","referenceTitle":"M3 REN","headline":"M3 REN","subHeadline":"For ZEISS RST, Renishaw SP, Hexagon HP-S","description":"

Styli with M3 thread suitable for ZEISS RST, Renishaw SP and Hexagon HP-S sensors. M3 styli can also be connected to other thread systems using the appropriate adaptors and connecting elements. Styli spheres are made of ruby or silicon nitride. In addition to the standard spherical styli, cylindrical styli made of tungsten carbide and ruby are also available. The standard straight shaft is made of tungsten carbide, but a stepped shaft is also available to provide additional stiffness.

","image":{"type":"Global Image","referenceTitle":"M3 REN Image","src":"https://zeiss.com/content/dam/content-fragments/iqs/shared-assets/hws/categories/cmm/cmm-attributes-explanation/thead-type-layer-section/m3-ren.png","alt":"M3 REN","width":1128,"height":564,"format":"image/png","size":124628},"ctas":[]},{"type":"IQS-Teaser","referenceTitle":"M2","headline":"M2","subHeadline":"For touch-trigger probes","description":"

Styli with M2 thread are particularly suitable for touch-trigger probes. With the appropriate connecting element, they can also be connected to other thread systems.

","image":{"type":"Global Image","referenceTitle":"M2Image","src":"https://zeiss.com/content/dam/content-fragments/iqs/shared-assets/hws/categories/cmm/cmm-attributes-explanation/thead-type-layer-section/m2.png","alt":"M2","width":1128,"height":564,"format":"image/png","size":106742},"ctas":[]},{"type":"IQS-Teaser","referenceTitle":"Without thread","headline":"Without thread","subHeadline":"For various stylus configurations","description":"

Styli without thread can be combined with corresponding clamping inserts to form various stylus configurations (including L, T, and star styli). 

They are available as stepped and straight versions.

","image":{"type":"Global Image","referenceTitle":"Without thread image","src":"https://zeiss.com/content/dam/content-fragments/iqs/shared-assets/hws/categories/cmm/cmm-attributes-explanation/thead-type-layer-section/without-thread.png","alt":"Without thread","width":1128,"height":564,"format":"image/png","size":3830},"ctas":[]},{"type":"IQS-Teaser","referenceTitle":"FindingStylus","headline":"Do you need help finding the correct stylus?","subHeadline":"Book our application support","description":"

If you are unsure which stylus system best to use, you can book our application support to investigate and suggest a solution for you.

","ctas":[{"type":"IQS-Button","referenceTitle":"FindingStylusCta","label":"Contact application support","link":{"type":"Global Link","referenceTitle":"ApplicationSupportLink","url":"https://www.zeiss.com/metrology-store/application-support","text":"Application Support","target":"_blank"}}]}]},{"type":"IQS-Section","referenceTitle":"StylusGeometryLayer","headline":"Stylus geometry","subHeadline":"Geometry subtitle","contents":[{"type":"IQS-Teaser","referenceTitle":"DiscStylus","headline":"Disc stylus","subHeadline":"Great for smaller diameters","description":"

Disc styli are used, among other things, to measure rotationally symmetrical workpieces with undercuts or recesses and bores. However, a strong filtering of the surface roughness usually occurs. With the design of the spherical disk stylus, a higher accuracy is achieved compared to disk styli.

","image":{"type":"Global Image","referenceTitle":"DiscStylusImage","src":"https://zeiss.com/content/dam/content-fragments/iqs/shared-assets/hws/categories/cmm/cmm-attributes-explanation/stylus-geometry-layer-section/disc-stylus.png","alt":"Disc stylus","width":1128,"height":564,"format":"image/png","size":434616},"ctas":[]},{"type":"IQS-Teaser","referenceTitle":"HemisphereStylus","headline":"Hemisphere stylus","subHeadline":"Great for smaller diameters","description":"

Hemispherical styli are suitable for the measurement of undercuts and for those applications that require a large measuring probe sphere diameter with low weight. To enhance this effect, the stylus is also available with the special form of the hollow hemisphere.

","image":{"type":"Global Image","referenceTitle":"HemisphereStylusImage","src":"https://zeiss.com/content/dam/content-fragments/iqs/shared-assets/hws/categories/cmm/cmm-attributes-explanation/stylus-geometry-layer-section/hemisphere-stylus.png","alt":"Hemisphere stylus","width":1128,"height":564,"format":"image/png","size":616130},"ctas":[]},{"type":"IQS-Teaser","referenceTitle":"LStylus","headline":"L stylus","subHeadline":"Geometry subtitle","description":"

With L-styli, the measuring probe sphere is at a 90° angle to the stylus shaft. Due to their L-shape, these styli are particularly suitable for measuring undercuts in bores. In addition, L-styli can also be used for measuring points that are difficult to access (e. g. on the underside of the workpiece).

","image":{"type":"Global Image","referenceTitle":"LStylusImage","src":"https://zeiss.com/content/dam/content-fragments/iqs/shared-assets/hws/categories/cmm/cmm-attributes-explanation/stylus-geometry-layer-section/l-stylus.png","alt":"L stylus","width":1128,"height":564,"format":"image/png","size":456086},"ctas":[]},{"type":"IQS-Teaser","referenceTitle":"StarStylus","headline":"Star stylus","subHeadline":"Great for smaller diameters","description":"

Star styli consist of spherical styli combined in a star shape and enable measurements in different coordinate directions. Whereas probing with spherical styli from the side surfaces is only possible to a limited extent, with the star stylus you can select the stylus for probing that is orthogonal to the probed surface.

","image":{"type":"Global Image","referenceTitle":"StarStylusImage","src":"https://zeiss.com/content/dam/content-fragments/iqs/shared-assets/hws/categories/cmm/cmm-attributes-explanation/stylus-geometry-layer-section/star-stylus.png","alt":"Star stylus","width":1128,"height":564,"format":"image/png","size":596496},"ctas":[]},{"type":"IQS-Teaser","referenceTitle":"Straight","headline":"Straight","subHeadline":"Geometry subtitle","description":"

Ceramic shafts offer high stiffness with low weight and are therefore particularly recommended for long stylus shafts where weight is a critical factor.

They also ensure, due to their brittleness, that in the event of a collision the stylus will break first which prevents damage to the probe head or machine.

","image":{"type":"Global Image","referenceTitle":"StraightImage","src":"https://zeiss.com/content/dam/content-fragments/iqs/shared-assets/hws/categories/cmm/cmm-attributes-explanation/stylus-geometry-layer-section/straight.png","alt":"Straight","width":1128,"height":564,"format":"image/png","size":54670},"ctas":[]},{"type":"IQS-Teaser","referenceTitle":"FindingStylus","headline":"Do you need help finding the correct stylus?","subHeadline":"Book our application support","description":"

If you are unsure which stylus system best to use, you can book our application support to investigate and suggest a solution for you.

Cylindrical styli measure two-dimensionally and are particularly suitable for thin sheets. Narrow workpiece edges can also be measured well with cylindrical measuring probes. However, the probe axis must be mechanically aligned very precisely with the feature axis on the workpiece.

","image":{"type":"Global Image","referenceTitle":"CylinderStylusImage","src":"https://zeiss.com/content/dam/content-fragments/iqs/shared-assets/hws/categories/cmm/cmm-attributes-explanation/stylus-geometry-layer-section/cylinder-stylus.png","alt":"Cylinder stylus","width":1128,"height":564,"format":"image/png","size":630165},"ctas":[]}]},{"type":"IQS-Section","referenceTitle":"SphereMaterialsLayer","headline":"Stylus tip materials","subHeadline":"Ruby, silicone nitride, ceramics, diamond /diamond coated or metal","contents":[{"type":"IQS-Teaser","referenceTitle":"TungstenCarbide","headline":"Tungsten carbide","subHeadline":"For special stylus’ geometries","description":"

For special diameters or disc styli, we offer tungsten carbide or steel as tip materials. While steel is softer than tungsten carbide, it can be machined into larger diameters. These materials tend to be very heavy, so they are only recommended when you need extraordinarily large sizes and forms that are not available in other materials.

","image":{"type":"Global Image","referenceTitle":"TungstenCarbideImage","src":"https://zeiss.com/content/dam/content-fragments/iqs/shared-assets/hws/categories/cmm/cmm-attributes-explanation/sphere-materials-layer-section/tungsten-carbide.png","alt":"Tungsten carbide","width":1128,"height":564,"format":"image/png","size":135745},"ctas":[]},{"type":"IQS-Teaser","referenceTitle":"Steel","headline":"Steel","subHeadline":"For special stylus’ geometries","description":"

","image":{"type":"Global Image","referenceTitle":"SteelImage","src":"https://zeiss.com/content/dam/content-fragments/iqs/shared-assets/hws/categories/cmm/cmm-attributes-explanation/sphere-materials-layer-section/steel.png","alt":"Steel","width":564,"height":282,"format":"image/png","size":47212},"ctas":[]},{"type":"IQS-Teaser","referenceTitle":"SiliconeNitride","headline":"Silicone nitride","subHeadline":"Great for aluminum","description":"

Silicone nitride is a very hard ceramic, with high spherical precision and highly polished. As they are difficult to machine, they are more expensive than ruby styli. Silicone nitride styli can be produced from a 0.3 mm sphere size. There tends to be less material build up when scanning untreated aluminum or abrasive surfaces. Generally, they tend to outlast ruby balls and are a good choice for any material but cast iron and steel.

","image":{"type":"Global Image","referenceTitle":"SiliconeNitrideImage","src":"https://zeiss.com/content/dam/content-fragments/iqs/shared-assets/hws/categories/cmm/cmm-attributes-explanation/sphere-materials-layer-section/silicone-nitride.png","alt":"Silicone nitride","width":1128,"height":564,"format":"image/png","size":74166},"ctas":[]},{"type":"IQS-Teaser","referenceTitle":"RubyTips","headline":"Ruby tips","subHeadline":"For almost all needs","description":"

Ruby are what most of our spherical styli tips are made of. It is suitable for most common measuring tasks. Diameters as small as 0.12 mm are possible. It is almost as hard as diamond, but relatively inexpensive.

There are two part materials where ruby is not recommended: Aluminum, as there will be a build up onto the ball, potentially damaging your part and reducing precision. Cast iron is not recommended as this would damage the ball surface. For these applications, pick alternatives like ceramics, silicone nitride or diamond.

","image":{"type":"Global Image","referenceTitle":"RubyTipsImage","src":"https://zeiss.com/content/dam/content-fragments/iqs/shared-assets/hws/categories/cmm/cmm-attributes-explanation/sphere-materials-layer-section/ruby-tips.png","alt":"Ruby tips","width":1128,"height":564,"format":"image/png","size":170602},"ctas":[]},{"type":"IQS-Teaser","referenceTitle":"Diamond","headline":"Diamond","subHeadline":"The hardest material known to man","description":"

If you are scanning very soft materials (like aluminum alloys) or very hard surfaces (like ceramics), considering a diamond or diamond-coated stylus tip makes sense, as the sphere will neither have material build-up nor wear out. This results in a supreme life expectancy for the stylus.

Pure diamond is the most longlived, but only available in diameter sizes up to 3 mm. For applications where you need a larger tip diameter, diamond-coated ceramic tips are a good alternative.

","image":{"type":"Global Image","referenceTitle":"DiamondImage","src":"https://zeiss.com/content/dam/content-fragments/iqs/shared-assets/hws/categories/cmm/cmm-attributes-explanation/sphere-materials-layer-section/diamond.png","alt":"Diamond","width":1128,"height":564,"format":"image/png","size":90719},"ctas":[]},{"type":"IQS-Teaser","referenceTitle":"DiamondCoated","headline":"Diamond coated","subHeadline":"For special stylus’ geometries","description":"

","image":{"type":"Global Image","referenceTitle":"DiamondCoatedImage","src":"https://zeiss.com/content/dam/content-fragments/iqs/shared-assets/hws/categories/cmm/cmm-attributes-explanation/sphere-materials-layer-section/diamond-coated.png","alt":"Diamond coated","width":1128,"height":564,"format":"image/png","size":135745},"ctas":[]},{"type":"IQS-Teaser","referenceTitle":"Ceramics","headline":"Ceramics","subHeadline":"Our specialist when it gets rough","description":"

Ceramics allow large diameters for styli tips. As they have a low porosity, they are very helpful for scanning rough surfaces such as cast iron. They can be cheaper than ruby, but tend to have less sphericity than ruby. To manage weight there are also semi-spheres available for larger diameters.

","image":{"type":"Global Image","referenceTitle":"CeramicsImage","src":"https://zeiss.com/content/dam/content-fragments/iqs/shared-assets/hws/categories/cmm/cmm-attributes-explanation/sphere-materials-layer-section/ceramics.png","alt":"Ceramics","width":1128,"height":564,"format":"image/png","size":86893},"ctas":[]},{"type":"IQS-Teaser","referenceTitle":"FindingStylus","headline":"Do you need help finding the correct stylus?","subHeadline":"Book our application support","description":"

If you are unsure which stylus system best to use, you can book our application support to investigate and suggest a solution for you.

","ctas":[{"type":"IQS-Button","referenceTitle":"FindingStylusCta","label":"Contact application support","link":{"type":"Global Link","referenceTitle":"ApplicationSupportLink","url":"https://www.zeiss.com/metrology-store/application-support","text":"Application Support","target":"_blank"}}]}]},{"type":"IQS-Section","referenceTitle":"ShaftMaterialsLayer","headline":"Shaft materials","subHeadline":"Ceramic, carbon fiber, tungsten carbide stepped, tungsten carbide straight","contents":[{"type":"IQS-Teaser","referenceTitle":"PickingStylus","headline":"Picking the right stylus for your CMM","subHeadline":"Find your perfect match for precision measurement","description":"

Selecting the appropriate stylus for your measurement machine is crucial for achieving accurate and reliable results. Consider factors such as the material of the shaft, the required length, and the specific measurement tasks you'll be performing. Material: Different materials like carbon fiber, ceramic, and tungsten carbide offer unique advantages in terms of stiffness, weight, and thermal expansion. Choose a material that best suits your application needs.Length: Ensure that the stylus length is suitable for your measurement requirements. Longer styli can reach difficult areas but may introduce challenges in stability.Application: Consider the environment and type of measurements. For example, if you're working in fluctuating temperatures or magnetic fields, select a stylus designed for those conditions. 

For personalized assistance in finding the perfect stylus, explore our guided shopping feature. Let us help you make the best choice for your measurement needs

","ctas":[]},{"type":"IQS-Teaser","referenceTitle":"Ceramic","headline":"Ceramic","subHeadline":"Lightweight strength for extended reach","description":"

Ceramic shafts offer high stiffness with low weight and are therefore particularly recommended for long stylus shafts where weight is a critical factor. They also ensure, due to their brittleness, that in the event of a collision the stylus will break first which prevents damage to the probe head or machine.

","image":{"type":"Global Image","referenceTitle":"CeramicImage","src":"https://zeiss.com/content/dam/content-fragments/iqs/shared-assets/hws/categories/cmm/cmm-attributes-explanation/shaft-materials-layer-section/ceramic.png","alt":"Ceramic","width":1128,"height":564,"format":"image/png","size":54670},"ctas":[]},{"type":"IQS-Teaser","referenceTitle":"CarbonFiber","headline":"Carbon fiber","subHeadline":"High performance material","description":"

ZEISS carbon fiber shafts are lightweight, rigid and are not sensitive to thermal variations. This makes them particularly suitable for long styli and demanding measurement tasks, such as in production with constantly changing ambient temperatures. They are also ideal for magnetic applications.

","image":{"type":"Global Image","referenceTitle":"CarbonFiberImage","src":"https://zeiss.com/content/dam/content-fragments/iqs/shared-assets/hws/categories/cmm/cmm-attributes-explanation/shaft-materials-layer-section/carbon-fiber.png","alt":"Carbon fiber","width":1128,"height":564,"format":"image/png","size":64254},"ctas":[]},{"type":"IQS-Teaser","referenceTitle":"Alumnium","headline":"Aluminium","subHeadline":"Great for smaller diameters","description":"

If the sphere diameter is 1 mm or below, or the length of the stylus up to 50 mm, tungsten carbide is great because of its excellent rigidity. Beyond this, weight may become an issue. 

To counter this, consider using a stepped stylus, but bear in mind that this also reduces the measurement length.

","image":{"type":"Global Image","referenceTitle":"AlumniumImage","src":"https://zeiss.com/content/dam/content-fragments/iqs/shared-assets/hws/categories/cmm/cmm-attributes-explanation/shaft-materials-layer-section/aluminium.png","alt":"Aluminium","width":1128,"height":564,"format":"image/png","size":53241},"ctas":[]},{"type":"IQS-Teaser","referenceTitle":"TungstenCarbide","headline":"Tungsten carbide ","subHeadline":"Great for smaller diameters","description":"

If the sphere diameter is 1 mm or below, or the length of the stylus up to 50 mm, tungsten carbide is great because of its excellent rigidity. Beyond this, weight may become an issue. 

To counter this, consider using a stepped stylus, but bear in mind that this also reduces the measurement length.

","image":{"type":"Global Image","referenceTitle":"TungstenCarbideImage","src":"https://zeiss.com/content/dam/content-fragments/iqs/shared-assets/hws/categories/cmm/cmm-attributes-explanation/shaft-materials-layer-section/tungsten-carbide.png","alt":"Tungsten carbide ","width":1128,"height":564,"format":"image/png","size":53241},"ctas":[]},{"type":"IQS-Teaser","referenceTitle":"Steel","headline":"Steel","subHeadline":"Great for smaller diameters","description":"

If the sphere diameter is 1 mm or below, or the length of the stylus up to 50 mm, tungsten carbide is great because of its excellent rigidity. Beyond this, weight may become an issue. 

To counter this, consider using a stepped stylus, but bear in mind that this also reduces the measurement length.

","image":{"type":"Global Image","referenceTitle":"SteelImage","src":"https://zeiss.com/content/dam/content-fragments/iqs/shared-assets/hws/categories/cmm/cmm-attributes-explanation/shaft-materials-layer-section/shaft-steel.png","alt":"Steel","width":1128,"height":564,"format":"image/png","size":53241},"ctas":[]},{"type":"IQS-Teaser","referenceTitle":"Titanium","headline":"Titanium","subHeadline":"Great for smaller diameters","description":"

If the sphere diameter is 1 mm or below, or the length of the stylus up to 50 mm, tungsten carbide is great because of its excellent rigidity. Beyond this, weight may become an issue. 

To counter this, consider using a stepped stylus, but bear in mind that this also reduces the measurement length.

","image":{"type":"Global Image","referenceTitle":"TitaniumImage","src":"https://zeiss.com/content/dam/content-fragments/iqs/shared-assets/hws/categories/cmm/cmm-attributes-explanation/shaft-materials-layer-section/titanium.png","alt":"Titanium","width":1128,"height":564,"format":"image/png","size":53241},"ctas":[]}]},{"type":"IQS-Section","referenceTitle":"SharedSection","headline":"Shared section","contents":[{"type":"IQS-Teaser","referenceTitle":"ErrorResult","headline":"Something went wrong","shortDescription":"Please try loading the content again.","image":{"type":"Global Image","referenceTitle":"ErrorResultMedia","src":"https://zeiss.com/content/dam/content-fragments/iqs/shared-assets/error-images/filters-error.png","alt":"Styli list error illustration","width":600,"height":400,"format":"image/png","size":22317},"ctas":[{"type":"IQS-Button","referenceTitle":"ErrorResultRetryCta","label":"Retry"}]},{"type":"IQS-Teaser","referenceTitle":"AddToQuoteSuccessToast","headline":"{count, plural, =1 {1 item} other {# items}} added to quote","shortDescription":"You have {count, plural, =1 {1 item} other {# items}} in your quote list. Subtotal: {price}","ctas":[{"type":"IQS-Button","referenceTitle":"ViewQuoteButton","label":"View quote"}]},{"type":"IQS-Teaser","referenceTitle":"AddToCartSuccessToast","headline":"{count, plural, =1 {1 item} other {# items}} added to cart","shortDescription":"You have {count, plural, =1 {1 item} other {# items}} in your cart. Subtotal: {price}","ctas":[{"type":"IQS-Button","referenceTitle":"ViewCartButton","label":"View cart"}]},{"type":"IQS-Teaser","referenceTitle":"AddToCartFailedToast","headline":"Something went wrong with processing your action.","shortDescription":"Please try again later","ctas":[]},{"type":"IQS-View","referenceTitle":"CategoryView","labels":[],"staticLabels":[{"type":"IQS-Label","referenceTitle":"DetailsText","label":"Details"},{"type":"IQS-Label","referenceTitle":"VatText","label":"excluding VAT"},{"type":"IQS-Label","referenceTitle":"CollapseText","label":"Collapse"},{"type":"IQS-Label","referenceTitle":"OverallText","label":"Overall"},{"type":"IQS-Label","referenceTitle":"ShowAllText","label":"Show all"},{"type":"IQS-Label","referenceTitle":"ProductPluralText","label":"products"},{"type":"IQS-Label","referenceTitle":"ProductText","label":"product"},{"type":"IQS-Label","referenceTitle":"StylusTipText","label":"Stylus tip"},{"type":"IQS-Label","referenceTitle":"StylusShaftText","label":"Stylus shaft"}],"actions":[{"type":"IQS-Button","referenceTitle":"AddToQuoteButton","label":"Add to quote"},{"type":"IQS-Button","referenceTitle":"ProductDetailsCta","label":"Show product details"},{"type":"IQS-Button","referenceTitle":"AddToCartButton","label":"Add to cart"},{"type":"IQS-Button","referenceTitle":"ViewProductPageButton","label":"View product page"}],"product":{"type":"IQS-Product","referenceTitle":"ProductAttributes","attributes":[{"type":"IQS-Product-Attribute","referenceTitle":"Angle","shortName":"Angle 1(W1)","longName":"Angle 1(W1)"},{"type":"IQS-Product-Attribute","referenceTitle":"MeasurementLength","shortName":"Measurement length (ML)","longName":"Measurement length (ML)"},{"type":"IQS-Product-Attribute","referenceTitle":"DShaft","shortName":"Ø Shaft (DS)","longName":"Ø Shaft (DS)"},{"type":"IQS-Product-Attribute","referenceTitle":"DSphere","shortName":"Ø Sphere (DK)","longName":"Diameter sphere (DK)"},{"type":"IQS-Product-Attribute","referenceTitle":"TipMaterial","shortName":"Tip material","longName":"Tip material"},{"type":"IQS-Product-Attribute","referenceTitle":"MeasuringLengthF","shortName":"3. Measuring Length (MLF)","longName":"3rd measurement length (MLF)"},{"type":"IQS-Product-Attribute","referenceTitle":"DShaftE","shortName":"Ø 2. Shaft (DSE)","longName":"2nd shaft diameter (DSE)"},{"type":"IQS-Product-Attribute","referenceTitle":"DBody","shortName":"Ø Body (DG)","longName":"Ø Body (DG)"},{"type":"IQS-Product-Attribute","referenceTitle":"Weight","shortName":"Weight","longName":"Weight"},{"type":"IQS-Product-Attribute","referenceTitle":"Length","shortName":"Length (L)","longName":"Length (L)"},{"type":"IQS-Product-Attribute","referenceTitle":"Width","shortName":"Width (B)","longName":"Width (B)"},{"type":"IQS-Product-Attribute","referenceTitle":"DShaftF","shortName":"Ø 3. Shaft (DSF)","longName":"3rd shaft diameter (DSF)"},{"type":"IQS-Product-Attribute","referenceTitle":"MeasuringLengthE","shortName":"2. Measuring length (MLE)","longName":"2nd Measurement length (MLE)"},{"type":"IQS-Product-Attribute","referenceTitle":"Price","shortName":"Price","longName":"Price"},{"type":"IQS-Product-Attribute","referenceTitle":"ConnectionType","shortName":"Connection Type","longName":"Connection Type"},{"type":"IQS-Product-Attribute","referenceTitle":"MaterialNumber","shortName":"Material number","longName":"Material number"},{"type":"IQS-Product-Attribute","referenceTitle":"StylusType","shortName":"Stylus type","longName":"Stylus type"},{"type":"IQS-Product-Attribute","referenceTitle":"ShaftMaterial","shortName":"Shaft material","longName":"Shaft material"},{"type":"IQS-Product-Attribute","referenceTitle":"TipGeometry","shortName":"Tip geometry","longName":"Tip geometry"},{"type":"IQS-Product-Attribute","referenceTitle":"ProductInformation","shortName":"Product information","longName":"Product information"},{"type":"IQS-Product-Attribute","referenceTitle":"Application","shortName":"Application","longName":"Application"},{"type":"IQS-Product-Attribute","referenceTitle":"ProductType","shortName":"Product type","longName":"Product type"},{"type":"IQS-Product-Attribute","referenceTitle":"MeasuringSensor","shortName":"Measuring sensor","longName":"Measuring sensor"},{"type":"IQS-Product-Attribute","referenceTitle":"Availability","shortName":"Availability","longName":"Availability"},{"type":"IQS-Product-Attribute","referenceTitle":"NumberPositions","shortName":"Number positions","longName":"Number positions"},{"type":"IQS-Product-Attribute","referenceTitle":"MeasurementLengthG","shortName":"Measurement length (MLG)","longName":"Measurement length (MLG)"},{"type":"IQS-Product-Attribute","referenceTitle":"MeasurementLengthH","shortName":"Measurement length (MLH)","longName":"Measurement length (MLH)"},{"type":"IQS-Product-Attribute","referenceTitle":"AccuracyLevel","shortName":"Accuracy level","longName":"Accuracy level"},{"type":"IQS-Product-Attribute","referenceTitle":"ConnectionTypeOut","shortName":"Connection Type Out","longName":"Connection Type Out"},{"type":"IQS-Product-Attribute","referenceTitle":"Angle2","shortName":"Angle 2(W2)","longName":"Angle 2(W2)"},{"type":"IQS-Product-Attribute","referenceTitle":"Material","shortName":"Material","longName":"Material"},{"type":"IQS-Product-Attribute","referenceTitle":"ExtensionType","shortName":"Extension type","longName":"Extension type"},{"type":"IQS-Product-Attribute","referenceTitle":"TemperatureResistant","shortName":"Temperature resistant","longName":"Temperature resistant"},{"type":"IQS-Product-Attribute","referenceTitle":"OpticalCharacteristics","shortName":"Optical Characteristics ","longName":"Optical Characteristics "},{"type":"IQS-Product-Attribute","referenceTitle":"Magnetic","shortName":"Magnetic","longName":"Magnetic"},{"type":"IQS-Product-Attribute","referenceTitle":"AdhesiveStrength","shortName":"Adhesive Strength","longName":"Adhesive Strength"},{"type":"IQS-Product-Attribute","referenceTitle":"MeasuringForce","shortName":"Measuring force","longName":"Measuring force"},{"type":"IQS-Product-Attribute","referenceTitle":"ThreadG1","shortName":"Thread (G1)","longName":"Thread (G1)"},{"type":"IQS-Product-Attribute","referenceTitle":"ThreadG2","shortName":"Thread (G2)","longName":"Thread (G2)"},{"type":"IQS-Product-Attribute","referenceTitle":"Height","shortName":"Height (H)","longName":"Height (H)"},{"type":"IQS-Product-Attribute","referenceTitle":"Radius","shortName":"Radius (R)","longName":"Radius (R)"},{"type":"IQS-Product-Attribute","referenceTitle":"LH","shortName":"LH","longName":"LH"},{"type":"IQS-Product-Attribute","referenceTitle":"LV","shortName":"LV","longName":"LV"},{"type":"IQS-Product-Attribute","referenceTitle":"Length1","shortName":"Length 1 (L1)","longName":"Length 1 (L1)"},{"type":"IQS-Product-Attribute","referenceTitle":"Diameter1","shortName":"Diameter (D1)","longName":"Diameter (D1)"},{"type":"IQS-Product-Attribute","referenceTitle":"Diameter2","shortName":"Diameter (D2)","longName":"Diameter (D2)"},{"type":"IQS-Product-Attribute","referenceTitle":"Diameter3","shortName":"Diameter (D3)","longName":"Diameter (D3)"},{"type":"IQS-Product-Attribute","referenceTitle":"Dsg","shortName":"Ø 4. Shaft (DSG)","longName":"Ø 4. Shaft (DSG)"},{"type":"IQS-Product-Attribute","referenceTitle":"DimensionA","shortName":"Dimension A","longName":"Dimension A"},{"type":"IQS-Product-Attribute","referenceTitle":"DimensionB","shortName":"Dimension B","longName":"Dimension B"},{"type":"IQS-Product-Attribute","referenceTitle":"DimensionC","shortName":"Dimension C","longName":"Dimension C"},{"type":"IQS-Product-Attribute","referenceTitle":"DimensionD","shortName":"Dimension D","longName":"Dimension D"},{"type":"IQS-Product-Attribute","referenceTitle":"DimensionE","shortName":"Dimension E","longName":"Dimension E"},{"type":"IQS-Product-Attribute","referenceTitle":"DimensionF","shortName":"Dimension F","longName":"Dimension F"},{"type":"IQS-Product-Attribute","referenceTitle":"DimensionG","shortName":"Dimension G","longName":"Dimension G"},{"type":"IQS-Product-Attribute","referenceTitle":"DimensionH","shortName":"Dimension H","longName":"Dimension H"},{"type":"IQS-Product-Attribute","referenceTitle":"ClampingRange","shortName":"Clamping range","longName":"Clamping range"},{"type":"IQS-Product-Attribute","referenceTitle":"ShaftLength","shortName":"Shaft length","longName":"Shaft length"},{"type":"IQS-Product-Attribute","referenceTitle":"ShaftDiameter","shortName":"Shaft diameter","longName":"Shaft diameter"},{"type":"IQS-Product-Attribute","referenceTitle":"Quantity","shortName":"Quantity","longName":"Quantity"},{"type":"IQS-Product-Attribute","referenceTitle":"PointThickness","shortName":"Point thickness","longName":"Point thickness"},{"type":"IQS-Product-Attribute","referenceTitle":"PointDiameter","shortName":"Point diameter","longName":"Point diameter"},{"type":"IQS-Product-Attribute","referenceTitle":"PlateThickness","shortName":"Plate thickness","longName":"Plate thickness"},{"type":"IQS-Product-Attribute","referenceTitle":"OuterDiameter","shortName":"Outer diameter","longName":"Outer diameter"},{"type":"IQS-Product-Attribute","referenceTitle":"Machine","shortName":"Machine","longName":"Machine"},{"type":"IQS-Product-Attribute","referenceTitle":"Format","shortName":"Format","longName":"Format"},{"type":"IQS-Product-Attribute","referenceTitle":"EdgeLength","shortName":"Edge length","longName":"Edge length"},{"type":"IQS-Product-Attribute","referenceTitle":"Distance","shortName":"Distance","longName":"Distance"},{"type":"IQS-Product-Attribute","referenceTitle":"Diameter","shortName":"Diameter","longName":"Diameter"},{"type":"IQS-Product-Attribute","referenceTitle":"Coding","shortName":"Coding","longName":"Coding"}]}},{"type":"IQS-Group","referenceTitle":"AvailabilityStatus","headline":"MANDATORY HEADLINE MISSING!!!","contents":[{"type":"IQS-Tile","referenceTitle":"MadeToOrder","headline":"Made to order","description":"The item is not in stock. It will be produced for you when you order. The delivery time forecast is displayed in the shopping cart."},{"type":"IQS-Tile","referenceTitle":"LongerDeliveryTime","headline":"Longer delivery time","description":"The article is currently not available. We are working hard to make this item available to you again as soon as possible. The delivery time forecast is displayed in the shopping cart."},{"type":"IQS-Tile","referenceTitle":"ExpectedSoon","headline":"Expected soon","description":"Item is not in stock, but in the inflow. The item can be ordered, the delivery time forecast is displayed in the shopping cart."},{"type":"IQS-Tile","referenceTitle":"InStock","headline":"In stock","description":"Items in stock are shipped on the same day for orders placed on weekdays before 3 p.m. Please note the exact delivery date in your shopping cart."}]},{"type":"IQS-Teaser","referenceTitle":"LoginExpiredToast","headline":"Your session has expired.","shortDescription":"For your security, please sign in again to continue.","ctas":[{"type":"IQS-Button","referenceTitle":"LoginButton","label":"Sign in"}]},{"type":"IQS-Teaser","referenceTitle":"AddToQuoteButtonTooltip","headline":"Oops! Each product per quote can only hold 100 items. You’ve added {count} already, please modify your quantity to continue.","ctas":[]},{"type":"IQS-Teaser","referenceTitle":"AddToCartButtonTooltip","headline":"Oops! Each product per order can only hold 100 items. You’ve added {count} already, please modify your quantity to continue.","ctas":[]},{"type":"IQS-Teaser","referenceTitle":"LoginExpiredToast","headline":"Your session has expired.","shortDescription":"For your security, please sign in again to continue.","ctas":[{"type":"IQS-Button","referenceTitle":"LoginButton","label":"Sign in"}]}]}]}}]}]}]}]}]}]